Automatic controls for household use

This European Standard provides the electrical safety requirements for all devices connected to HBES/BACS. (Published Document (JS))

This product family standard sets the minimum level of EMC performance for HBES/BACS products intended to be connected to an HBES/BACS system. (Published Document (JS))

This standard applies to electrical equipment using signals in the frequency range 1,6 MHz to 30 MHz to transmit information on low voltage electrical systems, either on the public supply system or within installations in consumers premises. It does not specify the signal modulation methods nor the coding methods nor functional features. Environmental requirements and tests are not included. (Published Document (JS))

This product family standard sets the minimum level of EMC performance for HBES/BACS products intended to be connected to an HBES/BACS system. (Published Document (JS))

This product family standard sets the minimum level of EMC performance for HBES/BACS products intended to be connected to an HBES/BACS system. A set of devices connected to perform a stand alone application is not considered to be an HBES/BACS system and therefore are outside the scope of this European Standard. (Published Document (JS))

This Jordanian Standard defines the general technical requirements of a Home and Building Electronic System (HBES). It concerns cabling and topology, electrical safety for HBES device parts, in particular based on SELV or PELV, functional safety, environmental conditions, EMC requirements and behaviour in case of failures as well as specific HBES installation rules. (Published Document (JS))

In general, this part of IEC 60730 applies to energy regulators for use in, on, or in association with equipment for household and similar use, including energy regulators for heating, air conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. (Published Document (JS))

This part of standard plies to electric actuators for use in, on, or in association with equipment for household and similar use for heating, air-conditioning and ventilation. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. (Published Document (JS))

This Standard specifies the safety, construction and performance requirements for mechanical thermostats intended for use with gas appliances and similar use, hereafter referred to as ‘thermostats’. This Standard applies to thermostats with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 50 for use with one (Published Document (JS))

This part 2 of standard applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. (Published Document (JS))

This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of ?60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy (Published Document (JS))

This standard applies to timers and time switches for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof, including heating, air conditioning and similar applications. (Published Document (JS))

This standard is applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including. 16 A for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units (Published Document (JS))

This part of IEC 60730 applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating, air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc. or a combination thereof. (Published Document (JS))

This part of IEC 60730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use. (Published Document (JS))

This part of standard applies to the evaluation of thermal protectors for ballasts for tubular fluorescent lamps. (Published Document (JS))

This part of standard applies to automatic electrical temperature sensing controls for use in, on or in association with equipment for household and similar use, including electrical controls for heating, air-conditioning and similar lications. (Published Document (JS))

Applies to the partial evaluation of protectors as defined for sealed motor compressors, the inherent safety, operating times, operating values and operating sequences where such are associated with equipment safety and testing (Published Document (JS))

This standard applies to automatic electrical controls for use in, on, or in association with equipment for household and similar use, including controls for heating,air-conditioning and similar applications. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. (Published Document (JS))

This Standard defines the general technical requirements of a Home and Building Electronic System (HBES). It concerns cabling and topology, electrical safety for HBES device parts, in particular based on SELV or PELV, functional safety, environmental conditions, EMC requirements and behaviour in case of failures as well as specific HBES installation rules. (Withdrawn Document)

Applies to the inherent safety of automatic electrical controls for use in, on or in association with equipment for household and, similar use, including controls for heating, air-conditioning and similar applications. (Published Document (JS))

This part of standard applies to outomatic electrical water and air flow sensing controls for use in, on or in association with equipment for hosehold and similar use including controls for heating, air-conditioning and similar applications. (Published Document (JS))

This standard is concerned with the electrical control mechanism for Astkhaddmat home Balachtirtat should be available in the devices are sensitive to the water level of the floats or the type of pole used in sensitive applications boilers (Published Document (JS))

In general, this part of IEC 60730 applies to electrically operated door locks intended to prevent the opening of doors in equipment for household and similar use.This (Withdrawn Document)

Automatic electric controls to be incorporated in or associated with electrical appliances within the scope of BS EN 60335-1 and, parts 2 of BS EN 60335, unless specified in a particular part 2 of BS EN 60730. To be read in conjunction with BS EN 60730-1:1995 (Withdrawn Document)

This safety standard applies to the filter part of portable devices for household and similar uses (hereafter referred to as portable decoupling filters) consisting of the filter part, a plug or an appliance inlet or a provision for connection by terminals or with a non-rewirable cord and one (multiple) socket-outlet or an appliance outle. (Published Document (JS))

This part applies to the inherent safety, to the operating values, operating sequences where such are associated with equipment protection, and the testing of automatic electrical water level operating controls used in, on or in associtation with household and similar equipment (Published Document (JS))

This part of standard applies to electric actuators for use in, on, or in association with equipment for household and similar use for heating, air-conditioning and ventilation. The equipment may use electricity, gas, oil, solid fuel, solar thermal energy, etc., or a combination thereof. (Withdrawn Document)

Applies to the inherent safety, operating values, operating times and operating sequence. To be read in conjunction with JS 60730-1. (Withdrawn Document)

This standard applies to automatic electrical pressure sensing controls with a minimum gauge pressure rating of ?60 kPa and a maximum gauge pressure rating of 4,2 MPa, for use in, on or in association with, equipment for household and similar use that may use electricity, gas, oil, solid fuel, solar thermal energy (Withdrawn Document)

This part of standard applies to automatic electrical humidity sensing controls for use in, on or in association with equipment for household and similar use, including controls for heating,air-conditioning and similar applications. (Withdrawn Document)

This standard applies to the inherent safety to the operating values, operating times and operating sequences where such are associated whit equipment safety and the testing of thermal motor protectors uesd in or on household or similar equipment (Published Document (JS))

This part of standard applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and similar use. (Published Document (JS))

This of standard applies to electrically operated oil valves for use in, on or in association with equipment for household and similar use that use electricity, in combination with fuel in the liquid state such as distillates, residual fuels, etc. (Withdrawn Document)

This standard is applies to HBES switches with a working voltage not exceeding 250 V a.c. and a rated current up to and including. 16 A for household and similar fixed electrical installations either indoors or outdoors and to associated electronic extension units (Withdrawn Document)