Textile fabrics

This Jordanian standard specifies a procedure to determine the maximum force of textile fabrics using grab method. This method is mainly applicable to woven textile fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fiber, and mechanical, or chemical treatment. It is not normally applicable to geotextiles, nonwovens, coated fabrics, (Published Document (JS))

This Jordanian standard specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method. The method is mainly applicable to woven textile fabrics, including fabrics which exhibit stretch characteristics imparted by the presence of an elastomeric fiber, mechanical, or chemical treatment. (Published Document (JS))

This standard specifies the requirements of this specification to identify materials and manufacturing and detailed examination of the sheeting and pillows lips to be used for public purposes and shall be dimensioned in pillows, mattresses, and blankets. (Published Document (JS))

This standard specifies a method for the determination of length and width of textile fabrics that are in a tension-free relaxed state. the test is applicable to tixtile fabrics of full width, folded lengthwish down the middle or in tubular form, but no longer tan 100 m. (Published Document (JS))

This standard specifies the natural, mechanical,and chemical characteristic for cotton bedford clothes. (Published Document (JS))

this standard specifies two methods for the determination of the length of pieces of any length of woven fabrics. (Withdrawn Document)

0 (Final Draft Jordanian Document (FDJS))

Too Many (Final Draft Jordanian Document (FDJS))

This standard determines minimum performance requirements of fabrics made from cellulose,synthetic and blends used to make uniforms and works wear. (Published Document (JS))

this standard specifies two methods for the determination of the width of pieces of any length of woven fabric . (Withdrawn Document)

This part of standard specifies a procedure to determine the maximum force and elongation at maximum force of textile fabrics using a strip method.The method is mainly applicable to woven textile fabrics. (Withdrawn Document)

This standard describes the cone test method used to test tarpaulin textiles resistance to water (Published Document (JS))

This standard specifies three methods for the determination of threads per centimeter in woven fabrics . Any of the three methods can be used , the choice depends on the character of the fabric, Howver in case of dispute method A is recommended. (Published Document (JS))

This standard specifies a procedure for the determination of maximum force of textile fabrics as the grab test.The method is mainly applicable to woven textile fabrics.It is normally applicable to woven elastic fabrics.geotextiles.nonwovens,coated fabrics,textile-glass woven fabrics and fabrics made from carbon fibres and polyolefintape yarns. (Withdrawn Document)

This standard is specialized in jordaian flag fabric made of multi ester or multi amide (nylon) and itis suitable to be used in all climates (Published Document (JS))

Specifies methodsfor the determination of linear density of yarn removed from fabric (Published Document (JS))

Specifies apneumatic pressure method for the determination of bursting strengthand bursting distension of textile fabrics (Published Document (JS))

Describes ahydraulic method for the determination of bursting strength andbursting of textile fabrics (Published Document (JS))

Concerns methods for determination the burstingstrength of fabrics (Withdrawn Document)

specifies a method for testing wool fabrics and determination ofmaximum force and elongation of maximum force using the strip method (Withdrawn Document)

determination of sizing content in cellulosic or synthetic fibers and sizing content in cellulosic or synthehetic fibers. (Published Document (JS))

Specifies a methods for testing wool fabricsand determination of number of threads per unit length (Withdrawn Document)

Concerns tarpaulin cotton fabrics treated against waterpenetration and mold (Published Document (JS))

determination of methods for testing wool fabrics andmeasurement of width of pieces (Withdrawn Document)

specifies a method for testing wool fabrics and measurementof length of pieces (Withdrawn Document)

This standard specifies method for the determination of relaxation dimensional chanfe, felting ditermination change and total dimensional change during washing (Published Document (JS))

specifies a procedure for the determination of maximum force oftextile fabrics known as the grab test (Withdrawn Document)

Specifies a method for the determination of the lincear densityof glass-fibre, carbon-fibre and aramid-fibre yarns (Published Document (JS))

Describes a static immersion testwhich may be applied to any textile fabric for which a knowledge ofthe water absorption properties is required (Published Document (JS))

Defines terms for industrially produced machine knittedfabrics (Published Document (JS))

Concerns summer terylene clothes used for producing suits, trousersand some outerwear women clothes (Published Document (JS))

This Standard specifies a method for determination of the dimensional changes that occur when a fabric is subjected to immersion in cold water without agitation, and dried. lt is applicable to fabrics which, in use, are subjected to cold water without agitation. (Published Document (JS))

Concerns jordanianflag fabric made of polyamide polyester (nylon) acrylic and viscose (Withdrawn Document)

Concerns the determination of breaking strength and elongation of woven fabricsusing strip method (except fabrics containing rubber or polymericmaterials) (Withdrawn Document)

Concerns cotton and mixed fabrics used to make work-wear anduniforms (Withdrawn Document)

Specifies the requirements for cotton and cootton/polyester sheeting (Withdrawn Document)

Concernstarpaulin cotton fabrics treated against water penetration and mold (Withdrawn Document)

Describes the cone test method used to test tarpaulin textilesresistance to water (Withdrawn Document)

Specifies amethod for determination of dimensional change of wool containingfabrics during washing including ready types whose dimensions areless than that of test sample (Withdrawn Document)

Concerns methods for determination of water absorptionby fabrics (Withdrawn Document)

Includes methods for determination of mass of fabrics per unit oflength and area (Withdrawn Document)

Concerns methods for determination the burstingstrength of fabrics (Withdrawn Document)

Specifies a method fordetermination of sizing content in woven fabrics (Withdrawn Document)

Concerns the determination of dimensional changesof fabrics by cold water immersion without stirring followed bydrying (Withdrawn Document)

Specifies the physical chemical properties for cotton bedford clothes (Withdrawn Document)

Concerns summer terylene clothes used for producing suits, trousers and some outer wear women clothes (Withdrawn Document)

Includesstandard methods for determination of width, weight, threads per (cm)and tensile strength for wool fabrics (Withdrawn Document)

Explains standard methods for sampling of wool products (Published Document (JS))