Luminaires

This part of IEC 61995, which is to be read in conjunction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and similar purposes, for the electrical connection to final circuits rated not more than 16 A, without providing mechanical support for the luminaire. (Published Document (JS))

This standard applies to devices for the connection of luminaires (DCL) intended for household and similar purposes, for the electrical connection of fixed luminaires of class I or class II to final circuits rated at not more than 16 A without providing a mechanical support for the luminaire. (Published Document (JS))

This standard applies to the following track systems with two or more poles for the connection of liminaries of the electrical supply consisting of either. (Published Document (JS))

This standard specifies requirements for portable pedestal liminaires for use in places such as garden and for portable luminaires for use in places such as flower beds, for use with tungsten filament, tubular fluoresent and other discharge lamps on supply voltages not exceeding 250 V it is to be read in conjunction (Published Document (JS))

This section of Part 2 of standard specifies safety requirements for air-handling luminaires for use with a ventilation duct or ventilated space (plenum), for use with tubular fluorescent lamps on supply voltages not exceeding 1 000 V. It is to be read in conjunction with those sections of Part 1 to which reference is made. (Published Document (JS))

This section of standard specifies requirements for emergency lighting luminaires for use with electrical light sources on emergency power supplies not exceeding 1 000 V. (Published Document (JS))

For luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1000 V. To be read in conjunction with BS 4533-101 (Published Document (JS))

For tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1000 V. (Published Document (JS))

For use with tungsten filament and tubular fluorescent lamps on supply voltages not exceeding 250 V. To be read in conjunction with JS 60598-1. (Published Document (JS))

Floodlights for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 1000 V. To be read in conjunction with BS EN 60598-1 (Published Document (JS))

Specifies the requirements of the main socket outlets for lighting lamps outstanding night voltage does not exceed 250 volts in alternating current, and frequency 50/60 Hz (Published Document (JS))

This section of standard specifies requirements for photo and film luminaires (non-professional) for use with tungsten filament lamps on supply voltages not exceeding 250 V, including low-pressure tungsten halogen lamps specified in IEC Publication 357 with the reference 357-IEC-3155 . (Published Document (JS))

This part of standard specifies requirements for ground recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V, for indoor or outdoor use, e.g. in gardens, yards, carriageways, parking lots, cycleways, footways, pedestrian areas, swimming pools areas outside zones for SELV, nurseries and similar applications. (Published Document (JS))

This standard is concerned kits lighting of roads and street lighting and any lighting for Foreign Affairs (Published Document (JS))

This part of standard 61347 specifies general and safety requirements for miscellaneous electronic circuits used with luminaires for use on a. c. supplies up to 1000 V at 50 Hz or 60 Hz and/or d.c. supplies up to 250 V. (Published Document (JS))

This standard is specifies requirements for household aquarium luminaires for use with tungsten filament, tubular fluorescent or other discharge lamps on supply voltages not exceeding 1 000 V (Published Document (JS))

This standard applies to the following track systems with two or more poles for the connection of luminaires to the electrical supply of, either (Withdrawn Document)

This standard it for use with tungsten filament, tubular fluorescent and other dicharge lamps on supply voltage not exceeding 250 V. (Published Document (JS))

This standarad specifies Lighting chains fitted with series or parallel connected incandescent lamps for use either indoors or outdoors on supply voltages, not exceeding 250 V. To be read in conjunction with BS EN 60598-1:1997 (Published Document (JS))

This section of IEC 598-2 specifies requirements for luminaire with built-in transformers or convertors for filament lamps, with supply voltages and output voltages not exceeding:- 1 000 V for class I and class II luminaires and- 250 V for class 0 luminaires. (Published Document (JS))

This standard specifices the Luminaires intended for use where the necessity of limited temperature on the outer surface exists, due to the risk of combustible dust accumulating on the luminaires, but where the risk of explosion in the atmosphere does not exist. To be read in conjunction with BS EN 60598-1:1997. (Published Document (JS))

This part of standard specifies requirements for portable luminaires for children and for use with tungsten filament lamps or single capped fluorescent lamps on a supply voltage not exceeding 250 V. (Published Document (JS))

This standard specific requirements for luminaires for use with tungsten filament , fluoresecent and other discharge lamps on supply not exceeding 1000 V for use in clinical areas in which medical treatment. (Published Document (JS))

This section of IEC 598-2 specifies requirements for recessed luminaires for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltage not exceeding 1 000 V. This section does not cover air-handling luminaires. This section does not apply to air-handling or liquid-cooled luminaires. (Published Document (JS))

This section of standard specifies requirement for extra low voltage lighting ayatems for filamenet ;amps intended for ordinary interior use on supply voltages not exceeding 1 000 V. (Published Document (JS))

This part 1 of Standard JS 60598 specifies general requirementes for luminaires, incorporating electric light sources for operation from supply voltages up to 1 000 V. The requirements and related tests of this standard cover: classification, marking, mechanical construction and electrical construction. (Published Document (JS))

Specifies requirements for fixed luminaires intended for use in water, or in contact with water, for example in swimming pools, fountains, paddling pools, and garden pools, and for use with tungsten filament lamps. (Published Document (JS))

This standard specifies the heat test source (H.T.S) lamps for carrying out heating tests on luminaires. (Published Document (JS))

Specifies general requirements for theclassification and marking of luminaries and for their mechanical andelectrical construction, together with the related tests (Withdrawn Document)

Specifies general requirements forthe classification and marking of luminaries and for their mechanicaland electrical construction, together with the related tests (Withdrawn Document)