Lamp caps and holders

This part of standard applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. (Published Document (JS))

This Standard applies to lampholders with Edison thread E14, E27 and E40, designed for connection to the supply of lamps and semi-luminaires* only. It also applies to switched-lampholders for use in a.c. circuits only, where the working voltage does not exceed 250 V r.m.s (Published Document (JS))

This standard applies to lampholders designed with a barrel thread for shade holder rings designed to keep attachments to lampholders in place. It also covers barrel threads for shade holder rings. (Published Document (JS))

This standard applies to connectors for building-in (including those used for interconnection between LED modules) of Miscellaneous types to be used with PCB-based LED modules (Published Document (JS))

This standard applies to twist-on connecting devices for connecting two or more unprepared rigid and/or flexible copper conductor having a cross-sectional area of 0.5 mm up to and including 16mm and complying with IEC 60228 (Published Document (JS))

This International Standard states the technical and dimensional requirements for lampholders for tubular fluorescent lamps and for starterholders, and the methods of test to be used in determining the safety and the fit of the lamps in the lampholders and the starters in the starterholders. (Published Document (JS))

This standard applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. (Published Document (JS))

This part of standard applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. (Withdrawn Document)

This standard applies to lampholders S14 intended for building-in as well as for independent lampholders for use with linear incandescent lamps for general lighting service (GLS). independent lampholders are also tested as luminaires. (Published Document (JS))

This standard specifies method which is to be used when testing tungsten filament or discharge lamps for compliance with the limits. Temperature-rise limits for particular lamps are listed in the relevant lamp standards. (Published Document (JS))

applies to lampholders with edison thread E14, E27 and E40 designed for connection to supply of lamps and semi-luminaires only (Published Document (JS))