JS 10138:2020 Cryogenic vessels - Valves for cryogenic service
This Jordanian Standard specifies the requirements for the design, manufacture and testing of valves for cryogenic
service, i.e. for operation with cryogenic fluids below - 10 °C as well as at ambient conditions to allow for start-up
(Published Document (JS))
|
JS 2252-3:2020 Valves - Terminology Part 3: Definition of terms
This Jordanian Standard defines the terms and their definitions (or the source if defined in other European standards) used for several types of valves or in several fields of application. These terms concern the pressures and temperatures, the dimensions, the design, the flow control characteristics and the test of valves
(Published Document (JS))
|
JS 2252-2:2020 Valves - Terminology Part 2: Definition of components of valves
This Jordanian Standard specifies the names of components of valves and their definitions. It has the purpose to provide a uniform terminology for all components of valves.
(Published Document (JS))
|
JS 2252-1:2020 Valves - Terminology Part 1: Definition of types of valves
This Jordanian Standard specifies the denominations of valves to provide a uniform and systematic terminology for all types of valves.
(Published Document (JS))
|
JS 1923-4:2010 Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) Part 4: Valves
This Part of JS 1923 specifies the characteristics of valves made from polyethylene (PE) for piping systems in the
field of the supply of gaseous fuels.
(Published Document (JS))
|
JS 10161:2007 Industrial valves : Marking of metallic valves
This standard specifies the requirements for marking of industrial metallic valves. it defines the method of applying the marking on the body on flage
(Published Document (JS))
|
JS 10183:2007 Specification and testing for Liquefied Petroleum Gas (LPG) tank valves and fittings
This standard specifies minimum requirements for the design and testing of valves including appropriate fitting which are connected to mobile or static LPG tanks above 150 litre water capacity pressure relief valves and their ancillary equioment contents gouges and automotive LPG components are outside the scope of this standard.
(Published Document (JS))
|
JS 10170-3:2007 Industrial valves-Shell design strength - Part 3: Experimental method
This standard specifies requirements for an exerimental method of assessing the strength of valve shells by applying an elevated hydrostatic pressure test at room temperature.
(Published Document (JS))
|
JS 10167-1:2007 Rubber Industrial valves - Testing of valves - Part 1: Pressure tests , test procedures and acceptance criteria -Mandatory requirements
This standard specifies mandatory requirements for tests, test procedures and acceptance criteria for production testing of industrial valves
(Published Document (JS))
|
JS 10170-2:2007 Industrial valves - Shell design strength - Part 1: Calculation method for steel valve shells
This standard specifies the method for the strength calculation of the shell with respect to internal pressure of valve.
(Published Document (JS))
|
JS 10171:2007 Industrial valves - Diaphragm valves made of metallic materials
This standard specifies requirements for diaphragm valves with metallic materials.
(Published Document (JS))
|
JS 10170-1:2007 Industrial valves - Shell design strength - part1: Tabulation method for steel valves shells
This document specifies the tabulation method for determining the wall thickness of valve bodies with essentially cirular cross-section made in forged cast or fabricated steel
(Published Document (JS))
|
JS 548:1994 Valves - Water valves of nominal size(15-100) mm used for general purposes
Specifies technical requirementsfor water valves of nominal size DN (15-100) mm used for generalpurposes
(Withdrawn Document)
|
JS 547:1988 Valves - Testing methods for copper and bronze valves for potable water
Concerns testing methods for copper and bronzevalaes used for potable water
(Withdrawn Document)
|