Paints and varnishes

This part specifies a test method for determining the surface-drying characteristics of a coating of a paint or varnish which dries by the action of air or by chemical reaction of its components. (Committee Draft (CD))

0 (Committee Draft (CD))

This document specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions etc.). (Committee Draft (CD))

0 (Published Document (JS))

This Jordanian Standard specifies procedures for flash point tests, within the temperature range of –30 °C to 300 °C, for paints, including water-borne paints, varnishes, binders for paints and varnishes, adhesives, solvents, petroleum, and related products. The procedures are used to determine whether a product will or will not flash at a specified temperature (Published Document (JS))

This Jordanian standard specifies the requirements for environmentally friendly construction products for paints, paints, dyes and sealants, which are listed as environmentally friendly. (Published Document (JS))

This Jordanian Standard defines terms used in the field of coating materials (paints, varnishes and raw materials for paints and varnishes) .Terms relating to specific applications and properties are dealt with in standards concerning those applications and properties, e.g. corrosion protection, coating powders. Terms on nanotechnologies are harmonized with ISO/TS 80004-4 (Published Document (JS))

This JS specifies the Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber (Published Document (JS))

This JS specifies the Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation (Published Document (JS))

This JS specifies the test method of Determination of volatile organic compound (VOC) content, by Gas chromatography method, for paints and varnishes (Published Document (JS))

This JS specifies the test method of Determination of volatile organic compound (VOC) content by Difference method, for paints and varnishes (Published Document (JS))

This JS specifies the Standard Test Method for Hiding Power of Paints by Reflectrometry (Published Document (JS))

This JS specifies the Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity (Published Document (JS))

This standerd determines specification that should exist in textured paint (synthetic resin emulsion type) which is redy to use as final paint for internal and external walls . (Published Document (JS))

Many national and international regulations classify liquids as presenting a flammable hazard on the basis of their flash point, as determined by a recognized method. Some of these regulations allow a derogation if the substance cannot "sustain combustion" at some specified temperature or temperatures. This Jordanian Standard specifies a pass/fail procedure to determine whether (Published Document (JS))

0 (Draft Jordanian Document (DJS))

Concerns flat alkyd based paints for interior and exterior use (Published Document (JS))

Concerns air drying semigloss paints for general purposes. (Published Document (JS))

Concerns alkyd based undercoating paints for general purposes (Published Document (JS))

0 (Draft Jordanian Document (DJS))

Concerns emulsion which used to paint internal and external surfaces for building, mineral and woods surfaces (Withdrawn Document)

This Jordanian Standard specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions, etc.). The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (Published Document (JS))

Concerns air drying gloss paints for general purposes (Published Document (JS))

This standard concerns yellow and white thermoplastic roadmarking materials which are hot applied over asphalt and concreteroads (Published Document (JS))

This part of standard specifies the performance requirements for type approval of white thermoplastic materials , which have been melted and applied hot to road surfaces using screeding or sprayed application, as thin superimposed markings for centre lines, edge lines, pedestrian crossing stripes and the like. It does not apply to thermoplastic materials intended to be inset into road surfaces. (Published Document (JS))

This standard specifies the conditions and the requirments for the driers for paints and varnishes either solid or liquid. (Published Document (JS))

This standard concerns road marking paints applied over asphalt and concrete surfaces and has the ability to keep a reflective surface layer to enable seeing road marks at night (Published Document (JS))

this standerd determines specification that should exist in textured paint (synthetic resin emulsion type) which is redy to use as final paint for internal and external walls , which when use gives acoarse shape (Withdrawn Document)

Specifies Priming oil paints (Published Document (JS))

Concerns alkyd based undercoating paints for general purposes (Withdrawn Document)

Concerns standard test methods for water paints (emulsion) (Published Document (JS))

Concerns emulsion which used to paint internal and external surfaces for building, mineral and woods surfaces (Withdrawn Document)

Concerns airdrying semigloss enamel used as find finish over primer paints on wood and concrete surfaces (Withdrawn Document)

Concerns flat alkyd based paints for interior and exterior use (Withdrawn Document)

Concerns airdrying gloss enamel for general purposes (Withdrawn Document)

Specifiescellulose glossy lacquer for vehicles and specifies testing methodsans sampling (Published Document (JS))

Specifies requires to be completed forany particular application by the following supplementary informatoin (Published Document (JS))

Specifies a methodfor determining the density of paints, varnishes and related productsusing a pressure cup (Published Document (JS))

Specifies a method for determining the density of paints, varnishesand related products using balls or other round bodies as immersionbodies (Published Document (JS))

Specifies general methods for determining the resistance of a relatedproducts to the action of liquids (Published Document (JS))

Specifies a method for determining the resistance of paints orrelated products to the action of water by immersion (Published Document (JS))

Specifies a methodfor determining the density of paints, varnishes and related productsusing a pyknometer (Published Document (JS))

concerns sampling methods forpaints, varnishes and related products (Published Document (JS))

Specifies a methodfor determining the density of paints, varnishes and related productsusing an oscillator (Published Document (JS))

Concerns the determination of non volatile matter of paints,varnishes and binders for paints and varnishes (Withdrawn Document)

Concerns standard test methods for water paints(emulsion) (Withdrawn Document)

Describes apass/fail producer for use with paint and related products to determine whether or not a product has the ability to sustain combustion under specified conditions (Withdrawn Document)

Concerns air drying semigloss enamel used as afinal finish over primer paints on wood (Withdrawn Document)

Concerns alkyd based unercoating paints applied over wood and metallic surfaces as a pre-final coating (Withdrawn Document)

Concerns air drying gloss enamel for general purposes (Withdrawn Document)

Concerns nitrocellulose primer surfaces used as a surfacer or afiller applied over equipment, machines and automobiles surfaces (Withdrawn Document)

Concerns flat alkyd based paints applied over alkali-resistant primary paints for concrete surfaces or overanti-spot primer paints for wood surfaces (Withdrawn Document)

Concerns textured paints (synthetic resin emulsiontype) used as a final coat for external (Withdrawn Document)

Concerns water emulsion paints used for nonmetallic external andinternal surfaces excluding decorative emulsion paints (Withdrawn Document)

Concernsthe requirements for priming oil paints (Withdrawn Document)

Concerns alkyd primer paint applied over the steel oraluminium surfaces of vehicles and equipment bodies (Published Document (JS))

Concerns air-drying lacquer paints used for general purposes byspraying (Published Document (JS))

Concernsheat resisting paints used to coat surfaces exposed to heat asboilers surfaces and factories chimnies (Published Document (JS))

Concerns samplingmethods for paints, varnishes and related products (Withdrawn Document)

Specifies the requirements for the driers of paints and varnishes whether it's solid or liquid (Withdrawn Document)

Specifies a methodfor the determination of density for liquid paints and relatedproducts using glass or metallic hydrometers (Withdrawn Document)

Concerns yellow and white thermoplastic roadmarking materials which are hot applied over asphalt and concreteroads (Withdrawn Document)

Concerns Bollotini method used todetermine the surface drying time of paints coatings which are driedby air or as a result of chemical reactions occur between theingredients (Withdrawn Document)

Concernsroad marking paints applied over asphalt and concrete surfaces andhas the ability to keep a reflective surface layer to enable seeingroad marks at night (Withdrawn Document)

Specifies a standard method for thedetermination of volatile and non-volatile matter content in paints,varnishes and related products excluding the paints which areoxidizable or containing high volatility matters (Withdrawn Document)

Concerns thewater immersion method for the determination of paints (Withdrawn Document)

Concerns cellulose glossy laquer used to protectand decorate steel and metallic parts of vehicles (Withdrawn Document)