Electrical and electronic testing

# ICS Title
Search Results
JS EN 50270:2012 Electromagnetic compatibility (EMC) ـــ Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen

This Jordanian Standard specifies requirements for the electromagnetic compatibility (EMC) for electrical apparatus for the detection and measurement of combustible gases, toxic 1) gases or oxygen. This standard applies to apparatus intended for use in residential, commercial and light-industrial environments as well as to apparatus intended for use in industrial environments. (Published Document (JS))

JS EN 61010-2-032:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-032: Particular requirements for hand-held and hand-manipulated current sensors for eletrical test and measurement

This Standard applies to the HAND-HELD and hand-manipulated CURRENT SENSORS described below. These CURRENT SENSORS are for use in the measurement of current without physically opening the current path of the circuit being measured. They may be stand-alone CURRENT SENSORS or accessories to other equipment. (Published Document (JS))

JS EN 61010-2-020:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-020: Particular requirements for laboratory centrifuges

This Part 2 is applicable to electrically powered LABORATORY CENTRIFUGES. (Published Document (JS))

JS EN 61187:2009 Electrical and electronic measuring equipment - Documentation

This standard applies to the technical documentation to be supplied with electrical and electronic measuring equipment for use in laboratories (Published Document (JS))

JS EN 61010-2-081:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-081: Particular requirements for Automatic and semi-automatic laboratory equipment for analysis and other purposes

This part 2 applies to automatic and semi-automatic laboratory equipment for analysis and other purposes. (Published Document (JS))

JS EN 61010-1:2009 Residual Safety requirements for electrical equipment for measurement, control, and laboratory use Part 1: General requirements

This part of JS 61010 specifies general safety requirements for electrical equipment intended for professional, industrial process, and educational use, any of which may incorporate computing devices, as defined in a) to d) below, when used under the environmental conditions of 1.4. (Published Document (JS))

JS EN 61010-2-040:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials

This Standard specifies safety requirements for electrical equipment intended for sterilization, washing, and disinfection of medical materials in the medical, veterinary, pharmaceutical and laboratory fields, when used under the environmental conditions of 1.4. (Published Document (JS))

JS EN 61010-031:2009 Safety requirements for electrical equipment for measurements, control, and laboratory use Part 031: Safety requirements for hand-held probe assemblies for electrical measurement and test

This part of JS 61010 applies to hand-held and hand-manipulated PROBE ASSEMBLIES of the types described below, and related accessories which are intended for professional, industrial process, and educational use. These PROBE ASSEMBLIES are for use in the interface between an electrical phenomenon and test or measurement equipment. (Published Document (JS))

JS EN 61010-2-010:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-010: Particular requirements for laboratory equipment for the heating of material

This part of standard 61010 applies only to electrically powered laboratory equipment for the heating of materials, where the heating of materials is the only function or is one of several functions of the equipment. (Published Document (JS))

JS EN 61010-2-051:2009 Safety requiements for electrical equipment for measurement, control, and laboratory use Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

This part of JS 61010 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices may contain heating elements. (Published Document (JS))

JS EN 61010-2-061:2009 Safety requirements for electrical equipment for measurement, control, and laboratory use Part 2-061: Particular requirements for laboratory atomic spectrometers with thermal atomization and ionization

This part of JS 61010 applies to electrically powered laboratory atomic spectrometers with thermal atomization. (Published Document (JS))

JS 1643-2:2005 Instrument Transformers - Current transformers part 2: General tests

Thisstandard concerns instrument and current transformers gweneral test methods at frequencies from 15 to 100 hertz (Published Document (JS))

JS 1621:2004 Electricity metering equipment ( a.c.) - General requirements - Test and test condition - Metering equipment's

This standard covers type tests for electricity metering equipment for indoor and outdoor application and applies to newly manufactured equipment designed to measure the electrical energy on 50 HZ or 60 HZ , with avoltage up to 600 V. (Published Document (JS))

JS 585:2003 pipes-conduit systems for cable management-General requirements & testing methods

this standard specifiews conditions & tests needed for pipes used in electrical systems with volt up to 1000AC , 1500DC (Withdrawn Document)

JS 382-1:2001 Lead - Acid starter batteries - Part1 : General requirements and methods of test

It applicable to lead-acid batteries with a normal voltage of 12 V,used primarily as a power source for the starting and igniting ofinternal combution engine , lighting and for auxiliary equipment ofinternal combustion engine vehicles. (Withdrawn Document)

JS 1007:2000 Luminaires - Part 1: General requirements and tests

Specifies general requirements for theclassification and marking of luminaries and for their mechanical andelectrical construction, together with the related tests (Withdrawn Document)

JS 318-2:1999 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2 : Test methods

Specifies general requirement fortesting methods of the polyvinyl chloride insulated cables of ratedvoltages up to and including 450/750 V (Published Document (JS))

JS 1115:1996 Lifts and service lifts Part 10: Specification for the testing and examination of lifts and service lifts Section 10.1 - Electric lifts

Specifies requirements for the testing and examination of new electric lifts before the lift is put into service (Published Document (JS))

JS 1042:1996 Telecommunication equipments : Radio Methods of measurement on radio receivers for various classes of emission Part 4 : Radio - frequency measurements on receivers for frequency modulated sound - broad casting emissions

Describes methods for measurements to be applied to radio receivers designed for monophonic and stereophonic frequency modulated sound broadcast transmissions in ITU band 8 (VHF) (Published Document (JS))

JS 1041:1996 Telecommunication equipments - Methods of measurement on radio receivers for various classes of emission - Part 3- Receivers for amplitude modulated sound-broadcasting emissions

Applies to radio receivers for the reception of amplitude-modulated sound-broadcasting emissions. It deals mainl with measurements using radio-frequency singals applied to the antenna terminals of the receiver, or induced in a magnetic antenna (Published Document (JS))

JS 1040:1996 Telecommunication equipments - Methods of measurement on radio receivers for various classes of emission - Part one: General considerations and methods including audio-frequency measurements ,of measurement

Applies to radio receivers of any kind, excluding television receivers, it deal with the determination of performance ,comparison of equipment and the determination of proper practical applications by listing the characteristics which are useful for specifications and laying down uniform methods of meas (Published Document (JS))

JS 1003:1995 Telecommunication equipments - Aerials for the reception of sound and te levision broadcasting in the frequency range 30 MHz to 1 GHz Part 3 : Measu rement of mechanical properties, vibration and environmental tests

Concerns the measurement of mechanrical properties and vibration and environmental tests for aerials for the reception of sound and television proadcasting in the frequency range 30 MHz to 1GHz (Published Document (JS))

JS 1016:1995 Illuminating equipment - Glow-starters for fluorescent lamps - Part 1:Requirements and tests for safety

Concerns general & safety requirements for replaceable glow-starters used for preheat fluorescent lamps (Withdrawn Document)

JS 622:1971 Volumetric measures - Volumetric measures for liquid fuels and standard method for their calibration

This standard is about Volumetric measures - Volumetric measures for liquid fules and standard method for their calibration. (Withdrawn Document)