Binders. Sealing materials

Search Results
JS 1330:2018 Insulating materials - Standard specification for asphalt - coated glass-fiber venting base sheet used in roofing

This specification covers asphalt-impregnated and coated glass-fiber base sheet with mineral surfacing on the top side and coarse mineral granules on the bottom side for use as the first ply of a roofing membrane. These base sheets provide for the lateral release of pressure in roofing systems because they are not solidly attached and the coarse granular surface provides an open, (Published Document (JS))

JS 1192:2011 Insulating materials - Bitumen-saturated woven burlap fabrics used in roofing and waterproofing

This standard is specifies woven burlap cloth saturated with either asphalt or refined coal tar as determined by the buyer, user systems and membrane roofing or waterproofing, or according to manufacturer specifications. (Published Document (JS))

JS 1014:2011 Insulating materials - Flexible Sheets for Waterproofing - Reinforced bitumen Sheets for roof waterproofing - Definition and characteristics

This document specifies definitions and characteristics for flexible reinforced bitumen sheets for intended use is roofing. This covers sheets used as top layers, intermediate layers and underlayers. not cover reinforced bitumen sheets for waterproofing used as underlays for discontinuous roofing. (Published Document (JS))

JS 1193:2010 Insulating materials - Emulsified asphalt used as a protective coating for roofing

This specifiction coverd emulsified asphalt suitable for use as a protective coating for built-up roofs and other exposed surfaces with specified inclines. (Published Document (JS))

JS 709:2010 Insulating materials - Asphalt used in roofing

This specification covers four types of asphalt intended for use in built-up roof construction, construction of some modified bitumen systems, construction of bituminous vapor retarder systems, and for adhering insulation boards used in various types of roof systems. (Published Document (JS))

JS 10101:2007 Flexible sheets for waterproofing - Bitumen damp proof sheets including bitumen basement tanking sheets - Definitions and characteristics

This standard specifies definintion and characteristics of flexible reinforced bitumen sheets for which the intended use is as damp proofing for building, including basement tanking. it specifies the requirements and test methods and provides for evaluation of conformity of the products. (Published Document (JS))

JS 10098:2007 Flexible sheets for waterproofing- Reinforced bitumen sheets for roof waterproofing - Definitions and characteristics

This standard specifies definition and characterisitics for flexible reinforced bitumen sheets for which the intended use is rodfing.this cover sheets used as top layers, intermdiate layers and underlaers. it does not cover reiforced bitumen sheets for waterproofing used as underlays for discontinuous roffing. (Published Document (JS))

JS 10105:2007 Geosynthetic barriers - Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures

This standard specifies the relevant characteristics of geosynthetic barries, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of tunnels and underground structures, and the appropriate test methods to determine these characteristics. (Published Document (JS))

JS 10099-1:2007 Flexible sheets for waterproofing - Definitions and characteristics of underlays Part 1: Underlays of discontinous roofing

This standad specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs. it specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document. (Published Document (JS))

JS 10110:2007 Geosynthetic barriers - Characteristics required for use in the construction of solid waste storage and disposal sites

This standard specifies the relevant characteristics of geosynthetic barries,including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barries when used as fluid barries in the construction of solid waste storage and disposal sites and the appropriate test methods to determine these characteristics. (Published Document (JS))

JS 10104:2007 Geosynthetic barriers - Characteristics required for use in the construction of reservoirs and dams

This standard specifies the relevant characteristics of geosynthetic barries, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, to be used as fluid barriers in the construction of reservoirs and dams, and the appropriate test methods to determine these characteristics. (Published Document (JS))

JS 10102:2007 Flexible sheets for waterproofing - Bitumen water vapour control layers - Definitions and characteristics

This standard specifies definition and characteristics of flexible reinforced bitumen sheets for which the intended use is as water vaour control layers for building. it specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this standard. (Published Document (JS))

JS 10100:2007 Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet- Definitions and characteristics

This standard specifies definintion and characteristics of flexible plastic and rubber sheets for which the intended use is as damp proofing for builfing ,including basement tanking. it specifies the requirements and test methods and provides for evaluation of conformity of the products. (Published Document (JS))

JS 10111:2007 Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics

This standard specifies definintion and characteristics of plastic and rubber sheets includind sheets made out of their blends and alloys (thermoplastic rubber) for which the intended use is roof waterproofing.it specifies the requirements and test methods and provides for evaluation of conformity of the products. (Published Document (JS))

JS 10099-2:2007 Flexible sheets for waterproofing - Definitions and characteristics of underlays Part 2: Underlays for walls

This standad specifies the characteristics of flexible sheets for underlays which are to be used walls behind outside wall covering in order to avoid penetration of wind and water from outside. it specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document. (Published Document (JS))

JS 10109:2007 Geosynthetic barriers - Characteristics required for use in the construction of canals

This standard specifies the relevant characteristics of geosynthetic barries,including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barries when used as fluid barries in the construction of canals and the appropriate test methods to determine these characteristics. (Published Document (JS))

JS 10103:2007 Flexible sheets for waterproofing- Plastic and rubber vapour control layers- Definitions and characteristics

This standard specifies the characteristics of flexible sheets of plastic or rubber intended for use as water vapour control layers for building.it specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this standard. (Published Document (JS))

JS 10106:2007 Geosynthetic barriers - Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment

This standard specifies the relevant characteristics of geosynthetic barries, including polymeric geosynthetic barriers, clay geosynthetic barriers and bituminous geosynthetic barriers, when used as fluid barriers in the construction of liquid waste disposal sites, transfer stations and secondary containment, and appropriare test methods to determine these characteristics. (Published Document (JS))

JS 10107-1:2007 Binders for magnesite screeds - Caustic magnesia and magnesium chloride Part 1: Definitions, requirements

this standard specifies requirements for caustic magesia and magnesium chloride, which will be used for magnesite screed material and magnesite screeds as specified in EN 13813. (Published Document (JS))

JS 10053-1:2007 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate Part 1: Definitions and requirements

This standard applies to calcum sulfate binders and binders made of calcium sulfate used for the manufacture of floor screeds for interior use in building. It also includes requirements for factory made mixtures made of calcium sulfate used for the manufactyre of floor screeds. (Published Document (JS))

JS 1192:1998 Insulating materials - Bitumen saturated woven burlap fabrics used in roofing

This standard specifies Bitumen saturated woven burlap fabrics used in roofing. (Withdrawn Document)

JS 1144:1996 Sealants - Jointing products -Vocabulary

Includes technical terms difinitions related to jointing products used in construction (Published Document (JS))

JS 921:1993 Adhesives - Adhesives for use with ceramic tiles and mosaics

Concerns adhesives used for ceramic tiles and mosaicsadhesion (Withdrawn Document)

JS 913:1992 Sealants - Cold applied joint sealants for concrete pavements

Concerns cold applied joint sealants for concrete pavementswhich are ignition-resistant and applied either manually orautomatically (Published Document (JS))