JS 1682:2020 Cement - Determination of whiteness of white Portland cement
0
(Committee Draft (CD))
|
JS 10057:2019 Cement - Composition, specifications and conformity criteria for very low heat special cement
This Jordanian Standard defines and gives the specifications of six distinct very low heat special cement products and their constituents. The definition of each cement includes the proportions in which the constituents are to be combined to produce these distinct products in a single strength class having a limited heat of hydration value.
(Published Document (JS))
|
JS 2238-6:2019 Cement – Methods of testing cement Part 6: Determination of fineness
This part specifies the methods of determining the fineness of cement
(Published Document (JS))
|
JS 2238-3:2019 Cement – Methods of testing cement Part 3: Determination of setting time and soundness
This part specifies the methods for determining standard consistence, setting times and soundness of cements.
(Published Document (JS))
|
JS 2238-1:2019 Cement – Methods of testing cement Part 1: Determination of strength
This part specifies the test method of determining the compressive strength.
(Published Document (JS))
|
JS 2238-9:2019 Cement – Methods of testing cement Part 9: Heat of hydration – Semi-adiabatic method
This part specifies the method of measuring the heat of hydration of cements by means of
semi-adiabatic calorimetry
(Published Document (JS))
|
JS 2238-5:2019 Cement – Methods of testing cement Part 5: Pozzolanicity test for pozzolanic cements
This part specifies the test method of measuring the pozzolanicity of pozzolanic cement conforming to JS 30-1.
(Published Document (JS))
|
JS 2238-2:2019 Cement – Methods of testing cement Part 2: Chemical analysis of cement
This part specifies the methods for the chemical analysis of cement
(Published Document (JS))
|
JS 2238-10:2019 Cement – Methods of testing cement Part 10: Determination of the water-soluble chromium (VI) content of cement
This part specifies The method for the determination of the water-soluble chromium (VI) content of cement.
(Published Document (JS))
|
JS 2238-8:2019 Cement – Methods of testing cement Part 8: Heat of hydration – Solution method
This part specifies the method of determining the heat of hydration of cements by means of solution calorimetry.
(Published Document (JS))
|
JS 2238-7:2019 Cement – Methods of testing cement Part 7: Methods of taking and preparing samples of cement
This part specifies the Methods of taking and preparing samples of cement
(Published Document (JS))
|
JS 30-2:2019 Cement - Part 2: Conformity Evaluation
this standard specifies the scheme for the assessment and verification of constancy of performance (AVCP) of cements to their corresponding product specification standards.
(Published Document (JS))
|
JS 1679:2018 Determination of total organic carbon in limestone
This Standard specifies methods for the determination of the total organic carbon content (TOC) in limestone.
(Published Document (JS))
|
JS 115:2018 Cement – White Cement
0
(Committee Draft (CD))
|
JS 2133-6:2017 Admixtures forconcrete, mortar and grout Part 6: Sampling, conformity controland evaluation of conformity
This Jordanian Standard specifies procedures for sampling, conformity control and evaluation of conformity, for admixtures according to the series JS 2133 , this JS explain sampling for Liquid admixture from containers, from a tank load, Conformity Criteria, Initial type testing, Factory production control.
(Published Document (JS))
|
JS 2139:2016 Environmental friendly construction products - Plasterboard products
This Jordanian Standard includes all plasterboard products whose raw material composition includes gypsum. It excludes vinyl-faced gypsum boards. The gypsum plasterboard product comprises of at least 70 % by weight of natural or synthetic gypsum This JS includes: the scope the terms and definitions, the environmental criteria and the product characterizations
(Published Document (JS))
|
JS 30-1:2016 Cement Part 1: Composition, specifications and conformity criteria for common cement
This Standard defines and gives the specifications of 27 distinct common cements, 7 sulfate resisting common cements as well as 3 distinct low early strength blast furnace cements and 2 sulfate resisting low early strength blast furnace cements and their constituents. The definition of each cement includes the proportions in which the constituents are to be combined to produce
(Published Document (JS))
|
JS 115:2010 Cement - White Cement
This standard is concerned with the requirement that should be available in white cement
(Published Document (JS))
|
JS 851:2009 Standard Specification for Limestone Dimension Stone
This specification covers the material characteristics, physical requirements, and sampling method appropriate to the selection of limestone dimension stone for general building and structural purposes
(Withdrawn Document)
|
JS 10031-1:2007 Building lime Part 1: Definitions, specifications and conformity criteria
This standard applies to building limes used as binders for preparation of mortar and production of other products. It gives definition for the different types of building limes and their classification, it also gives requirements for their chemical and physical properties which depend on the type of building lim and specifies the conformity creteria.
(Published Document (JS))
|
JS 10036-1:2007 Specification for mortar for masonry - Part 1: Rendering and plastering mortar
This standard is applicable to factory made redering/plastering mortar based on inorganic binders for external and internal use on walls, celings, and partitions.
(Published Document (JS))
|
JS 30-1:2007 Cement Part1 : Composition, specifications and conformity criteria for common cements
This standard defines ans gives the specification of 27 distinct common cement products and their constituents. the definition of each cement includes the proportions in whch the constituents are to be combined to produce these distinct products in a range of six strength classes, the definition also includes requirements the constituents have to meet and the mechanical, physical and chemical
(Withdrawn Document)
|
JS 921:2007 Adhesives for tiles - Definitions and specifications
This standard is applicable to ceramic tile adhesives for internal and external tile installations on walls and floors and specifies the values of performance requirements for ceramic tile and gives the terminology concering the products, working methods, application proerties .etc,for ceramic tile adhesives
(Published Document (JS))
|
JS 10035-3:2007 Admixtures for concrete, mortar and grout Part3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling
This standard defines and specifies the requirements and conformity criteria for admixtures for use in cement based masonry mortar
(Published Document (JS))
|
JS 10036-2:2007 Specification for mortar for masonry - Part 2: Masonry mortar
This standard specifies requirements for factory made masonry mortars for use in masonry walls, columns and partitions.
(Published Document (JS))
|
JS 30-4:2007 Cement Part 4: Composition specifications conformity criteria for low early strength blastfurnace cements
This standard defines and gives the specifications of 3 distinct low early strength blastfurnace cement products and their constituents. The definition of each cement includes the proportion in which the constituents are to be combined to produce these distinct products in a range of three stregth class . The definition also includes requirements the comntituents have to meet and the mechanical, p
(Withdrawn Document)
|
JS 10057:2007 Cement - Composition, specifications and conformity criteria for very low heat special cements
This standard defines and gives the specification of 6 distinct very low heat special cement products and their constituents. the definition ofeach cement includes the proportions in which the constituents are to be combined to produce these distinct products in a single strength class having a limited heat of hydration value.
(Withdrawn Document)
|
JS 10046:2007 Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test
This standard specifies the requirements and test methods for pigments for use in the colouring of building materials based on cement and cement/ lime combination. Pigments covered by this standard can also be used in pure lime mortar.
(Published Document (JS))
|
JS 10044:2007 Gypsum plasterboard - Definitions, requirements and test methods
This standard specifies the characteristics and performance of gypsum plasterboads to be used in building construction works including those intended for secondary manufacturing operations. It includes boards designed to receive either direct surface decoration or gypsum plaster.
(Published Document (JS))
|
JS 10054:2007 Screed material and floor screeds - Screed material - Properties and requirements
This standard specifies requirements for screed material for use in floor construction internally. To support the aim of achieving a performance related standard as for as practicable this standard refeers only to properties of the product and not to its method of manufacture, except when this is unavoidable in the description of the charateristics of the product.
(Published Document (JS))
|
JS 10050:2007 Gypsum blocks - Definitions, requirements and test methods
This standard specifies the characteristics and performance of gypsum blocks with smooth faces for which the main intended uses are constraction of non-load bearing partitions or independent wall linings and the fire protection of columns, lift shafts, etc. The gypsum blocks are not used to build ceilings.
(Published Document (JS))
|
JS 10051:2007 Gypsum based adhesives for gypsum blocks - Definitions, requirements and test methods
This standard specifies the characteristics and performance of gypsum based adhesives used for assembling gypsum blocks or other gypsum units. it covers following performance characteristics related to the essential requirements "reaction to fire" and" release of dangerous substances. It provides for the evaluation of conformity of the product to this standard.
(Published Document (JS))
|
JS 10053-1:2007 Binders, composite binders and factory made mixtures for floor screeds based on calcium sulfate Part 1: Definitions and requirements
This standard applies to calcum sulfate binders and binders made of calcium sulfate used for the manufacture of floor screeds for interior use in building. It also includes requirements for factory made mixtures made of calcium sulfate used for the manufactyre of floor screeds.
(Published Document (JS))
|
JS 1470-7:2005 Cement - Methods of testing cement Part 7 : Methods of taking and preparing samples of cement
This standard describes the equipment to be used, the methods to be followed , and the provisions to be complied with for taking samples of cement representitive to test quality of products prior , during and after delivery
(Withdrawn Document)
|
JS 1470-1:2005 Cement - Methods of testing cement Part1: Determination of strength
This standard describes amethod of determining the cpmpressive and flexural strengths of cement mortar
(Withdrawn Document)
|
JS 1470-8:2005 Cement - Methods of testing cement Part 8: Heat of hydration - Solution method
This standard describe amethod of determining the heat of hydration of cements by means of solution calorimetry also known as the solution method, this mwthod applies to cement and hydraulic binders whatever their chemical composition
this standard is applicable to cements and hydraulic binders whatever their chemical composition
(Withdrawn Document)
|
JS 1470-2:2005 Cement - Methods of testing cement Part 2: Chemical analysis of cement
This standard describes the procedures for the chemical analysis of cement
(Withdrawn Document)
|
JS 1470-5:2005 Cement – Methods of testing cement Part 5- Pozzolanicity test for pozzolanic cements
This standard describe the method of measuring the pozzolanicity of pozzolanic cement, it does not apply to portland pozzolana cements or to pozzolanas.
(Withdrawn Document)
|
JS 1470-3:2005 Cement - Methods of testing cement -Part 3 : Determination of setting time and soundness
This standard describe the method of determining setting time and soundness of cement
(Withdrawn Document)
|
JS 1470-21:2005 Cement - Methods of testing cement Part 21: Determination of the chloride , carbon dioxide and alkali content of cement
This standard lays down the mwthods for the determination of the chloride , carbon dioxide and alkali content of cement
(Withdrawn Document)
|
JS 1470-9:2005 Cement - Methods of testing cement Part 9: Heat of hydration - Semi-adiabatic method
This standard describe amethod of measuring the heat of hydration cement by means of semi-adiabtic calorimetry, this standard is applicable to all cements and hydraulic binders whatever their chemical composition, except quick setting cement
This standard is applicable to all cement and hydraulic binders whatever their chemical composition with the exception of quick-setting cements
(Withdrawn Document)
|
JS 1470-6:2005 Cement - Methods of testing cement Part 6 : Determination of fineness
This standard describetwo methods for the determination of fineness of cement
(Withdrawn Document)
|
JS 30-1:2005 Cement Part1:Composition, specification and conformity criteria for common cements
Concerns cement - specification,composition and conformity criteria
(Withdrawn Document)
|
JS 1679:2005 Determination of total organic carbon carbon in limestone
This standard specifies a method for the determinition of the organic carbon content in the limestone
(Withdrawn Document)
|
JS 118:2005 Cement - Sulfate-resisting Portland cement
This standard specifies conditions about Cement - Sulfate - resisting Portland cement.
(Withdrawn Document)
|
JS 1682:2005 Cement - Determination of whiteness of white Portland cement
This standard concerns the determination of white portland cement whiteness using spectrum beam device, and the percentage of reflected beam from the sample is the percentage of whiteness.
(Published Document (JS))
|
JS 115:2005 Cement - White Portland cement
This standard determines definitions,ingredients, and mechanical , physical , and chemical conditions in white cement. It also gives the conformity assessment rules.
(Withdrawn Document)
|
JS 1470-11:2001 Cement - Part 11: Determination of the specific surface area of solids by gas adsorption using the BET method
Concerns the determination of the specific area ofsolids by gas
(Withdrawn Document)
|
JS 1470-3:2001 Cement - Part 3: Methods of testingcement - Determination of testing time and soundness
Describesthe methods for determining setting time and soundness of cement
(Withdrawn Document)
|
JS 1470-5:2001 Cement - Part 5: Methods of testingcement - Determination of fineness
Describes two methodsof determining the fineness of cement
(Withdrawn Document)
|
JS 1470-7:2001 Cement - Part 7: Methods of testingcement - Determination of the chloride, cabon. dioxide and alkalicontent of cement
Specifies methods ofdetermining the chloride, carbon, dioxide and alkali content ofcement
(Withdrawn Document)
|
JS 30-2:2001 Cement - Part 2: Conformity evaluation
Specifies the scheme for the evaluation of conformity ofcementsto their corresponding product specification standards,including certification of conformity by a certification body
(Withdrawn Document)
|
JS 1470-1:2001 Cement - Part1: Methods of testing -Determination of strength
Describes amethod of determing the compressive and flexuralstrengths of cement mortar
(Withdrawn Document)
|
JS 1470-10:2001 Cement - Part 10- Admixture for concrete, mortar and grant concrete admixtures - Definitions and requirements
Specifies definitions andrequirements for admixtures for use in concrete, it cover admixturefor plain, reinforced and prestressed concrete
(Withdrawn Document)
|
JS 1470-8:2001 Cement - Part 8: Method of testingfly ash - Determination of free calcium oxide content
Concerns testing method for fly ash - determination of free calciumoxide content
(Withdrawn Document)
|
JS 1470-6:2001 Cement - Part 6: Methods of testingcement - Methods of sampling and sample preparation
Describe only the equipment to be used, the methods tobe followed and the provisions to be complied with for taking samplesof cement representative of given lots, for testing to access thequality of products prior to, during or after delivery
(Withdrawn Document)
|
JS 1470-2:2001 Cement - Part 2: Methods of testingcement - Chemical analysis of cement
Concerns methodstesting cement - chemical analysis of cement
(Withdrawn Document)
|
JS 1470-4:2001 Cement - Part 4: Methods of testingcement - Pozzolanicity test for pozzolanic cement
Describethe method of measuring the pozzolanicity of pozzolanic cement
(Withdrawn Document)
|
JS 1470-9:2001 Cement - Part 9: Tests forgeometrical properties of aggregates assessment of fines - Methyleneblue test
Specifies a methodfor determination of hte methylene blue va,ue of the 0/2 mm fractionin fine aggregate or altin aggregates(MB)
(Withdrawn Document)
|
JS 130:1998 Cement - Definition and terminology of cement
Concerns definition and teminology of commonly used cements
(Withdrawn Document)
|
JS 1107:1996 Adhesives - Gypsum rock for the manufacture of binders
Concerns gypsum rock used as a raw material in the manufacturing of calcium sulfate binders and other type of binders
(Published Document (JS))
|
JS 45:1994 Construction materials - Cement tile
Concerns common smooth and sorted cement tile and inlaid cement tile (mosaic)
(Withdrawn Document)
|
JS 115:1994 Cement - White portland cement
Specifies the requirements test methods of white portland cement
(Withdrawn Document)
|
JS 928:1993 Construction materials - Mortarad mixtures - Part 2: Retarding mortar admixtures
Concerns retarding mortar admixturesused in building, construction and concrete plastering
(Withdrawn Document)
|
JS 30:1993 Cement - Portland cement
Includes generalrequirements and testing methods for portland cement
(Withdrawn Document)
|
JS 153:1993 Lime - Building quick and hydrated Lime
Concerns quick and hydrated lime used in building
(Withdrawn Document)
|
JS 927:1993 Construction materials - Mortarad mixtures - Part 1: Air entraining admixtures (plasticizers)
Concerns air entrainingmortor admixtures (plasticizers) used in building, construction andconcrete plastering
(Withdrawn Document)
|
JS 219:1993 Cement - Portland pozzolana cement
Specifies the requirements
(Withdrawn Document)
|
JS 487:1993 Gypsum - Methods of testing hemihydrate building gypsum
Concerns methods of testing physical
(Published Document (JS))
|
JS 118:1993 Cement - Sulphate-resisting portland cement
Specifies he requirements
(Withdrawn Document)
|
JS 488:1992 Gypsum - Hemihydrate building gypsum
Specifies the requirements for hemihydrate building gypsum
(Published Document (JS))
|
JS 851:1992 Construction materials - Naturalbuilding stone (limestone)
Concerns natural building stone (limestone)
(Withdrawn Document)
|
JS 130:1979 Cement - Definitions and terminology of cements
Concerns the definitions and terminology of cements commonly used
(Withdrawn Document)
|