Cables

Search Results
JS 60811-403:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 403: Miscellaneous tests - Ozone resistance test on cross-linked compounds

This Part 403 of IEC 60811 specifies the method for the ozone resistance test, which typically applies to cross-linked compounds. (Committee Draft (CD))

JS 60811-405:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 405: Miscellaneous tests - Thermal stability test for PVC insulations and PVC sheaths

This Part 405 of IEC 60811 specifies the procedure for the thermal stability test which applies to PVC compounds. (Committee Draft (CD))

JS 60811-402:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 402: Miscellaneous tests - Water absorption tests

This Part 402 of IEC 60811 describes water absorption tests which typically apply to crosslinked and thermoplastic compounds used for insulating and sheathing materials (Committee Draft (CD))

JS 60811-401:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 401: Miscellaneous tests - Thermal ageing methods - Ageing in an air oven

This Part 401 of IEC 60811 specifies the procedure for ageing in an air oven, which typically applies to crosslinked and thermoplastic compounds used for insulating and sheathing materials. (Committee Draft (CD))

JS 60811-406:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 406: Miscellaneous tests - Resistance to stress cracking of polyethylene and polypropylene compounds

This Part 406 of IEC 60811 gives the procedure for evaluating the resistance to stress cracking of polyethylene and polypropylene compounds which are typically used for communication and optical fibre cables. (Committee Draft (CD))

JS 60811-404:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 404: Miscellaneous tests - Mineral oil immersion tests for sheaths

This Part 404 of IEC 60811 specifies the method for a mineral oil immersion test, which typically applies to cross-linked compounds used for sheathing materials. (Committee Draft (CD))

JS 60811-409:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 409: Miscellaneous tests - Loss of mass test for thermoplastic insulations and sheaths

This Part 409 of IEC 60811 gives the procedure for measuring the loss of mass which normally applies to PVC insulations and sheaths. (Committee Draft (CD))

JS 60811-407:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 407: Miscellaneous tests - Measurement of mass increase of polyethylene and polypropylene compound

This Part 407 of IEC 60811 gives the procedure to examine possible interaction between insulation material and filling compound of filled cable. (Committee Draft (CD))

JS 60811-408:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 408: Miscellaneous tests - Long-term stability test of polyethylene and polypropylene compounds

This Part 408 of IEC 60811 gives the procedure to establish as to whether or not the quality of a cable's components will be satisfactory over the proposed life of a communication cable. (Committee Draft (CD))

JS 60811-202:2021 Electric and optical fiber cables - test methods for non-metallic materials part 202: General tests - Mesurement of thickness of non-metallic sheath

0 (Committee Draft (CD))

JS 60811-301:2021 Electric and optical fiber cables - Test methods for non-metallic materials part 301: electrical tests - Measurement of permittivity at 23 °C of filling compound

0 (Committee Draft (CD))

JS 60811-100:2021 ُElectric and optical fiber cables - Test methods for non-metallic materials - part 100: General

0 (Committee Draft (CD))

JS 60811-203:2021 Electric and optical fiber cables - Test methods for non-metallic materials part 203: General tests - Measurement of overall dimensions

0 (Committee Draft (CD))

JS 60811-302:2021 Electric and optical fibre cables - Test methods for non-metallic materials Part 302: Electrical tests - Measurement of the d.c. resistivity at 23 °C and 100 °C of filling compounds

This Part 302 of IEC 60811 gives the procedure to examine the d.c. resistivity at 23 °C and 100 °C which typically applies to filling compounds used for communication cables and optical fibre cables. (Committee Draft (CD))

JS 60811-201:2021 Electric and optical fiber cables - test methods for non-metallic materials part 202: General tests - Mesurement of insulation thickness

0 (Committee Draft (CD))

JS 2271-1:2020 Power cables with extruded insulation and their accessories for rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) Part 1: Cables for rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV)

0 (Draft Jordanian Document (DJS))

JS EN 50395:2013 Electrical test methods for low voltage energy cables

This standard contains electrical test methods required for the testing of harmonized low voltage energy cables, especially those rated at up to and including 450/750 V. (Published Document (JS))

JS EN 50290-2-1:2013 Communication cables Part 2-1: Common design rules and construction

This European Standard harmonises the standardisation of symmetrical, coaxial and optical cables used for the infrastructure of communication, multimedia and control networks. Most of the cables covered by this European Standard are primarily intended to be used in IT networks. However, they can also be used for other applications with the exception of those which presume a direct connection (Published Document (JS))

JS EN 50290-2-21:2013 Communication cables Part 2-21: Common design rules and construction ـــ PVC insulation compounds (A1:2007)

This part 2-21 of EN 50290 gives specific requirements for PVC insulation compounds used for communication cables. For cables with a maximum rated temperature of 90 °C, compound of Grade TI55 shall be used and it shall comply with the requirements described in Table 1. (Published Document (JS))

JS EN 50525-1:2013 Electric cables ـــ Low voltage energy cables of rated voltages up to and including 450/750 V (U0/U) Part 1: General requirements

This European Standard gives the general requirements for rigid and flexible energy cables of rated voltages U0/U up to and including 450/750 V a.c., used in power installations and with domestic and industrial appliances and equipment. (Published Document (JS))

JS EN 50396:2013 Non electrical test methods for low voltage energy cables

EN 50396 contains non-electrical test methods required for the testing of harmonized low voltage energy cables, especially those rated at up to and including 450/750 V. (Published Document (JS))

JS EN 50290-2-22:2013 Communication cables Part 2-22: Common design rules and construction ـــ PVC sheathing compounds (A1:2007)

This part 2-22 of EN 50290 gives specific requirements for PVC sheathing compounds used for communication cables. For cables with a maximum rated temperature of 90 °C, compound of Grade TM53 shall be used and it shall comply with the requirements described in Table 1. For oil resistant PVC cables, sheathing compound Grade TM54 or TM55 chosen according to the environmental conditions shall be used (Published Document (JS))

JS EN 50290-2-20:2013 Communication cables Part 2-20: Common design rules and construction ـــ General

The series of part 2 of the European Standard EN 50290 specifies common design rules and construction requirements for materials used for communication cables. (Published Document (JS))

JS EN 50290-4-1:2013 Communication cables Part 4-1: General considerations for the use of cables ـــ Environmental conditions and safety aspects

This Part 4-1 of the European Standard EN 50290 gives the environmental conditions and safety aspects of symmetrical, coaxial and optical cables used for the infrastructure of communication and control networks. (Published Document (JS))

JS IEC 60799:2010 Electrical accessories - Cord sets and interconnection cord sets

Specifies requirements for cord sets for household and similar general purpose equipment. (Published Document (JS))

JS IEC 60811-2-1:2010 Insulating and sheating materials of electric and optical cables - Common test methods Part 2-1: Methods specific to elastomeric compounds - Ozone resistance, hot set and mineral oil immersion tests

This standard specifies the test methods to be used for testing polymeric insulating and sheathing materials of electric and optical cables for power distribution and telecommunications, including cables used on ships and in offshore applications. (Published Document (JS))

JS EN 50214:2009 Flat polyvinyl chloride sheathed flexible cables

This Standard covers the construction, requirements and particular test methods for flat, flexible PVC insulated and PVC sheathed cables, of rated voltage Uo/U 300/500 V, for use in passenger and goods lifts (elevators), and Uo/U 450/750 V for general purposes and for special applications such as hoists and travelling cranes. (Published Document (JS))

JS EN 61138:2009 Cables for portable earthing and short-circuiting equipment

This standard applies to flexible cables with insulation based on ethylene propylene rubber (EPR), polyvinyl chloride (PVC) or silicone rubber (SiR) for portable earthing and short-circuiting equipment. (Published Document (JS))

JS 61034-1:2008 Measurement of smoke density cables burning under defined conditions Part 1 :Test apparatus

This standard provides details of the test apparatus to be used for measuring smoke emission when electric or optical fiber cables are burnt under define conditions, (Published Document (JS))

JS 61034-2:2008 Measurement of smoke density cables burning under defined conditions Part 2 :Test procedure and requirements

This standard provides details of the test procedure to be employed for the measurement of the density of smoke emitted from cables buring under defined conditions. it describes the means of preparing and assembling cables for test, the method of burning the cables, and gives recommendeded requirements for evaluating test results. (Published Document (JS))

JS 60228:2008 Conductors of insulated cables

This standard is specifies the nominal cross-sectional areas, in the range 0.5 mm to 2 500 mm, for conductors in electric power cables and cords of a wide range of types. requirements for numbers and sizes of wires and resistance values are also included. these conductors include solid and stranded copper (Published Document (JS))

JS 50395:2008 Electrical test methods for low voltage energy cables

This standard is contains electrical test mehods required for the testing of harmonized low voltage energy cables, especially those rated at up to and includeing 450/750 V. (Withdrawn Document)

JS 60702-2:2007 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V -Part 2: Terminations

This standard specifices requirements for terminations for use with mineral insulated cables complying with the requirements of IEC 60700-1. (Published Document (JS))

JS 50266-2-2:2007 Common test methods for cables under fire conditions - Test for vertical flam spread of vertically - Mounted bunched wires or cables - Part 2-2 : Procedures-category A

This test isintended for type approval testing. the requirements for the selection of cables for testing are given in annex A. (Published Document (JS))

JS 60332-2-1:2007 Tests on electric and optical fibre cables under fire conditions Part 2-1: Test for vertical flame propagation for a single small insulated wire or cable - Apparatus

This part of IEC 60332 specifies the test apparatus for testing the resistance to vertical flame propagation for a single small vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. (Published Document (JS))

JS 60719:2007 Calculation for the lower and upper limits for the average outer dimensions of cables with circular copper conductors and of rated voltages up to and including 450/750 V

This standard not applicable to mineral insulated cables. For calculating the diameter over the core assembly for determining the sheath thickness, the method given in Appendix A of IEC 60502 should be used. (Published Document (JS))

JS 60811-4-2:2007 Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Warpping test after conditioning at elevated temperature - Warpping test after thermal ageing in air-Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation

This part of standard specifies the test methods for testing polymeric insulating and sheathing materials of electric and optical fiber cable for power distribution and communications including cables used on ships and on offshore applictions. (Published Document (JS))

JS 50267-2-2:2007 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-2: Procedures - Determination of degree of acidity of gases for materials by measuring pH and conductivity

Specifies the procedure for the determination of the amount of halogen acid gas, other than hydroflouric acid, evolved during the combustion of compounds based on halogenated polymers, and compounds containing halogenated additives, taken from cable constructions. (Published Document (JS))

JS 50266-1:2007 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically - mounted bunched wires or cables - Part 1: Apparatus

Specifies methods of test for the assessment of vertical flam spread of vertically-mounted bunched wires or cables, electrical or optical, under defined conditions. (Published Document (JS))

JS 50266-2-3:2007 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: Procedures - Category B

This part of standard covers category B and relates to cables installed on the test ladder to achieve a nominal total volume of non-metallic of 3.5 litres per metre of test sample. (Published Document (JS))

JS 50267-2-3:2007 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 2-3 : Procedures - Determination of degree of acidity of gases for cables by determination of the weighted average of pH and conductivity

Specifies the test method and procedure for the determination of the degree of acidity of gases evolved during the combustion of electrical or optical cables by determination of the weighted average of pH and conductivity of the constituent materials. (Published Document (JS))

JS 60702-1:2007 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V Part 1: Cables

This standard applies to mineral insulated generla wiring cables with copper or copper alloy sheath and copper conductore and with rated voltages of 500 V and 750V. (Published Document (JS))

JS 60332-1-1:2007 Tests on electric and optical fibre cables under fire conditions-Part 1-1: Test for vertical flame propagation for a single insulated wire or cable - Apparatus

This part of IEC 60332 specifies the test apparatus for testing the resistance to vertical flame propagation for single vertical electrical insulated conductor or cable or optical fibre cable under fire conditions. (Published Document (JS))

JS 60332-2-2:2007 Tests on electric and optical fibre cables under fire conditions Part 2-2: Test for vertical flame propagation for a single small insulated wire or cable - Procedure for diffusion flame

This part of IEC 60332 specifies the procedure for testing the resistance to vertical flame propagation for a single small vertical electrical insulated conductor or cable, or optical cable, under fire conditions. The apparatus is given in IEC 60332-2-1. (Published Document (JS))

JS 50266-2-4:2007 Common test methods for cables under fire conditions - Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-4 : Procedures-category C

This standard specifies method of test for the assessment of vertical flame spread of vertically-mounted bunched wires or cables, electrical or optical under defined conditions (Published Document (JS))

JS 50267-1:2007 Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 1: Apparatus

Specifies apparatus suitable for use with procedures for the quantitative determination of gases, especially acidic and corrosive gases, evolved when non-metallic materials taken from cables are subject to combustion. (Published Document (JS))

JS 50266-2-1:2007 Common test methods for cables under fire conditions -Test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-1 : Procedures-category A F/R

This part 2-1 covers category A F/R and relates only to power cables of conductor cross-swctional area grater than 35 mm installed on the test ladder in a spaced configuration on the front and rear to achieve a nominal total volume of non-metallic material of 7 liters per metre of test sample. (Published Document (JS))

JS 50267-2-1:2007 Common test methods for cables under fire conditions -Tests on gases evolved during combustion of materials from cables - Part 2-1: Procedures - Determination of the amount of halogen acid gas

Specifies the procedure for the determination of the amount of halogen acid gas, other than hydroflouric acid, evolved during the combustion of compounds based on halogenated polymers, and compounds containing halogenated additives, taken from cable constructions. (Published Document (JS))

JS 60332-1-2:2007 Tests on electric and optical fibre cables under fire conditions - Part 1-2: Test for vertical flame propagation for a single insulated wire or cable - Procedure for 1 kW pre-mixed flame

This part of IEC 60332 specifies the procedure for testing the resistance to vertical flame propagation for a single vertical electrical insulated conductor or cable, or optical fibre cable, under fire conditions. The apparatus is given in IEC 60332-1-1. (Published Document (JS))

JS 60332-1-3:2007 Tests on electric and optical fibre cables under fire conditions Part 1-3: Test for vertical flame propagation for a single insulated wire or cable - Procedure for determination of flaming droplets/particles

This part of standard specifies a test procedure for assessment of falling flaming droplets/ particles when a single vertical electrical insulated conductor or cable, or optical fibre cable, is subjected to defined fire conditions. (Published Document (JS))

JS 60811-4-1:2007 Insulating and sheathing materials of electric and optical cables - Common test methods Part 4-2: Methods specific to polyethylene and polypropylene compounds - Resistance to environmental stress cracking - measurement of the melt flow index - Carbon black and/ or mineral filler content measrement in polyethylene by direct combustion - Measurement of carbon black content by thermogravimetric analysis (TGA) - Assessment of carbon black dispersion in polyethylene using a microscope

This part of standard specifies the test methods to be used for testing polym eric insulating and sheathing materials of electric and optical fibre cables for power distribution and telecom-munications, including cables used on ships and in offshore applications. These test methods apply specifically to PE and PP compounds, including cellular compounds and foam skin. (Published Document (JS))

JS 60183:2007 Guide to the selection of high-voltage cables

This standard is applicable to high-voltage cables. It is intended to give guidance in the selection of the conductor size, insulation level and construction of cable to be used on three-phase alternating current systems operating at voltages exceeding 1 kV. It also summarizes the information which is necessary to enable the appropriate selection to be made. (Published Document (JS))

JS 60245-2:2007 Rubber insulated cables-rated voltages up to and including 450/750 V Part 2: test methods

This part of standard gives the test methods specified in all parts of IEC 60245 as far as not liad down in IEC 60811. (Published Document (JS))

JS 60245-1:2007 Rubber insulated cables-rated voltages up to and including 450/750 V Part 1: General requirements

This standard applies to rigid and flexible with insulation and sheath if any based on vulcanized rubber of rated volage including 450/750 V used in power installations of nominal voltage . (Published Document (JS))

JS 309:2001 Electric cables - Colours of covers of the cores of flexible cables and cords

Specifiescolours of the cores of flexible cables and cords (Published Document (JS))

JS 318-3:2000 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 3 : Non-sheathed cables for fixed wiring

Specifies polyvinyl chloride insulated cables of rated voltages up toand including 450/750 V - Sheathed cables for fixed wiring (Published Document (JS))

JS 318-5:2000 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5 : Flexible cables (cords)

Specifies the conditionsthat must be available in flexible cables (cords) polyvinyl chlorideinsulated (Published Document (JS))

JS 318-7:2000 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -Part 7: Flexible cables screened and unscreened with two or more conductors

Specifies a condition of polyvinylchlorideinsulated cables of rated voltage up to and including450/750v.flexible cables screened and unscreened with two or moreconductors. (Published Document (JS))

JS 318-6:2000 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 6 : Lift cables and cables for flexible connections

Specifies lift cables and cables forflexible connections of polyvinyl chloride insulated cables (Published Document (JS))

JS 318-4:2000 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -Part 4: Sheathed cables for fixed wiring

Concerns polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Part 4: Sheathed cables for fixed wiring (Published Document (JS))

JS 318-1:1999 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V -Part 1: General requirements

Specifies general requirement of polyvinyl chlorideinsulated cables of rated voltages up to and including 450/750v (Published Document (JS))

JS 318-2:1999 Electric cables - Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 2 : Test methods

Specifies general requirement fortesting methods of the polyvinyl chloride insulated cables of ratedvoltages up to and including 450/750 V (Published Document (JS))

JS 1046:1996 Electrical cables and wires -Characteristic impedances and dimensions of radio-frequency coaxial cables

Gives recommendations for rated characteristic impedances and associated dimensions over the dielectric for radio-frequency cables (Published Document (JS))

JS 967:1994 Electric cables - Part 2: Polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Section 5: Flexible cables (cords)

Concerns flexible cables insulatedby polyvinyl chloride of rated voltages up to and including 450/750 V (Withdrawn Document)

JS 968:1994 Electric cables - Part 2: Polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Section 6: Lift cables and cables for flexibleconnection

Concerns polyvinyl chloride insulated lift cables and cablesfor flexible connection of rated voltages up to and including 450/750V (Withdrawn Document)

JS 821:1992 Electric cables - Part 2: Polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Section 4: Sheathed cables for fixed wiring

Concerns sheathedpolyvinyl chloride insulated cables of rated voltages up to andincluding 450/750 V used for fixed wiring (Withdrawn Document)

JS 601:1989 Electric cables - Part two: Polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Section three: Non-sheathed cables for fixed wiring

Concernspolyvinyl chloride insulated and non-sheathed cables for fixed wiringof rated voltages up to and including 450/750 V (Withdrawn Document)

JS 533:1987 Electric cables - Guide to theselection of high-voltage cables

Summarises the necessary information that guide theselection of high-voltage cables as: insulation thickness,cable-section test and the cable type for a laod exceeds 1 kV (Withdrawn Document)

JS 318:1984 Electric cables - Part 2- Polyvinylchloride insulated cables of rated voltages up to and including 450/750 V - Section 1: General requirements

Specifies general requirementsfor polyvinyl chloride insulated cables of rated voltages up to andincluding 450/750 V (Withdrawn Document)

JS 387:1984 Electric cables - Part 2- Polyvinylchloride insulated cables of rated voltages up to and including450/750 V - Section 2- Test methods

Concerns testing methods of polyvinylchloride insulated cables of rated voltages up to and including450/750 V (Withdrawn Document)

JS 309:1983 Electric cables - Part one- Coloursfor electric cables - Section one- Colours for flexible cables andcords

Applies to flexible cables and cords which contains cors notexceeding 5 cors (Withdrawn Document)