Plastics pipes

Search Results
JS 1479:2018 Pipes - Polypropylene pipes (PP-H, PP-B, PP-R, PP-RCT) - Dimensions

This Jordanian standard is applicable to pipes made from homopolymer polypropylene (PP-H), block copolymer polypropylene (PP-B), random copolymer polypropylene (PP-R) and random copolymer polypropylene with modified crystalline structure and elevated temperature resistance (PP-RCT) as specified in DIN 8078. (Published Document (JS))

JS 765:2016 Pipes - Polypropylene (PP) pipes (PP-H, PP-B, PP-R, PP-RCT) - General quality requirements and testing

This Jordanian standard is applicable to circular-cross-section seamless polypropylene (PP) pipes made from homo-polymer polypropylene (PP-H), block copolymer polypropylene (PP-B), random copolymer polypropylene (PP-R) or random copolymer polypropylene with modified crystalline structure and elevated temperature resistance (PP-RCT). (Published Document (JS))

JS 2016-3:2013 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B

1-1 This part of JS 2016, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. (Published Document (JS))

JS 2005:2012 Plastics piping systems for pressure and non-pressure drainage and sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

This Jordanian Standard specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for drainage or sewerage with or without pressure, as well as the properties of the system itself. (Published Document (JS))

JS EN 2016-2:2012 Plastics piping systems for non-pressure underground drainage and sewerage ـــ Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A

This Part of JS 2016, together with EN 13476-1, specifies the definitions and requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are intended to be used for non-pressure underground drainage and sewerage systems. (Published Document (JS))

JS 2016-1:2012 Plastics piping systems for non-pressure underground drainage and sewerage ـــ Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Part 1: General requirements and performance characteristics

This Jordanian Standard, together with EN 13476-2 and EN 13476-3, specifies the definitions and general requirements for pipes, fittings and the system based on unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) structured-wall piping systems that are to be used for non-pressure underground drainage and sewerage systems. (Published Document (JS))

JS 1976:2011 Plastics piping systems for pressure and non-pressure water supply ـــ Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

This Jordanian Standard specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) for water supply with or without pressure, as well as the properties of the system itself. (Published Document (JS))

JS 1923-2:2010 Plastics piping systems for the supply of gaseous fuels — Polyethylene (PE) Part 2- Pipes

This part of Jordanian Standard specifies the characteristics of pipes made from polyethylene (PE) for piping systems in the field of the supply of gaseous fuels. field of the supply of gaseous fuels. (Published Document (JS))

JS 189-1:2008 Plastic piping systems - Polyethylene (PE) pipes and fittings for water supply Part 1: General

This standard specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water for human consumption, including raw water prior to treatment and water for general purposes. It also specifies the test parameters for the test methods to which it refers. (Published Document (JS))

JS 189-2:2007 Plastic piping systems - Polyethylene (PE) pipes and fitting for water supply Part 2- pipes

This part of standard specifies the characteristics of pipes made from polyethlene (PE) intended for the conveyance of water for human consuption, including raw water prior treatment and for the conveyance of water for general purpoe, it also specifies the test parameters for the test methods referred to in this standard (Published Document (JS))

JS 1549:2007 Pipes - Chlorinated polyvinyl chloride (CPVC) pipes - General quality requirements and testing

This standard identification requirements and testing methods for straight tubes welded non-circular section made of a multi-chlorinated vinyl chloride (CPVC) (Published Document (JS))

JS 159:2007 Pipes -Unplasticized polyvinyl chloride - General quality requirements and testing method

This stanndard specifie requirements and testing methods forseamless round pipes made of unplasticized polyvinyl chloride (PVC-U) high-impact modified polyviny chloride PVC-HI (type 1 and 2) or chalk reinforced unplasticized polyviny chloride (PVC-U-K). (Published Document (JS))

JS 595:2006 Pipes - Low density polyethlene(PE) pipes -General quality requiremenet and testing

This standard specifies properities and methods test Low density polyethylene (PE) that used as pipes. (Published Document (JS))

JS 1722:2006 Rubber or plastics and tubing - Bending tests

This standard specifies two method for determination of the behaviour of rubber or plastics hoses or tubing when bent to a specified radius (Published Document (JS))

JS 1706:2006 Pipes-Multilayer pipes from cross linked polyethylene - Aluminum-Cross linked polyethylene (PEX-AL-PEX)- Specifications

this standard concerns multilayer pipes from cross linked polyethylene .It determines terminology,specifications,test methods and labelling. (Published Document (JS))

JS 1022:2004 Pipes-Crosslinked high-density polyethylene(PE-X)pipes-Dimensions

this standerd specifies dimenision and tolerances for pipes made from crosslinked polyethylene(PE-X)as specifies in Din 16892 (Published Document (JS))

JS 1554:2004 Pipes - Chlorinated polyvinyl chloride (CPVC) pipes - Dimensions

Specifies dimensions and tolerances for seamless pipes of circular cross section made from chlorinated polyvinyl chloride (pvc-c) (Published Document (JS))

JS 1021:2004 Pipes – Crosslinked high-density polyethylene (PE-X) pipes – General quality requirements and testing

Specifies general quality requirements and testing for crosslinked high-density polyethelene (PE-X) pipes. (Published Document (JS))

JS 1549:2003 Pipes - Chlorinated polyvinyl chlodire (CPVC) pipes - General quality requirements and testing

Concerns general quality and requirements and testing for chlorinated polyvinyl chloride (CPVC) pipes (Withdrawn Document)

JS 1005:2003 Pipes - Polyethylene (PE) pipes for irrigation laterals - Specifications

Concerns specification and testing methods for polyethylene (PE) pipes for irrigation laterals (Published Document (JS))

JS 595:2003 Pipes - Low density polyethylene (PE) pipes - General quality requirements and testing

Specifies quality requirements and testing for low density polyethylene (PE) pipes (Withdrawn Document)

JS 1479:2002 Pipes - Polypropylene (pp) pipes - Dimension

Specifies dimensions and tolerances for seamless pipes of circular cross section, made from homopolymer polypropylene (PP-H 100) block copolymer (PP -B 80) or random copolymer polypropylene (PP-R) (Withdrawn Document)

JS 159:2002 Pipes - Unplasticized polyvinyl chloride pipes - General requirements and testing methods

Concerns General requirements and testing methods for unplasticized polyvinyl chloride pipes (Withdrawn Document)

JS 765:2002 Pipes - Polypropylene (P.P) pipes (Type 1, Type 2, Type 3) - Specifications

Specifies polypropylene pipes according its specification (Withdrawn Document)

JS 766:2002 Pipes –Polypropylene ( P.P ) pipes ( Type 1, type 2 and type 3) – Testing methods

Concerns polypropylene (o.p) pipes (type 1, type 2 and type 3) - Testing methods (Withdrawn Document)

JS 764:2002 Pipes - Thermoplastic pipes for the conveyance of fluids - Nominal outside diameter and nominal pressures - Metric series

Concerns thermoplastics pipes for conveyance of fluids - Nominal outside diameter and nominal pressures - Metric series (Published Document (JS))

JS 966:1996 Plastics - Unplasticized polyvinylchloride pipes for drains and sewers

Concerns unplasticized polyvinylchloride pipes used in buildings drainage, sewage water andventilation systems (Withdrawn Document)

JS 1005:1995 Plastics - Polyethylene (PE) pipes for irrigation laterals

Concerns polyethylene pipes used for irrigation laterals andtheir testing methods. Also concerns pressure pipes for waterconveying in irrigation at a temperature below 45 C (Withdrawn Document)

JS 1022:1995 Plastics - Dimensions of crosslinked polyethylene pipes

Concerns the dimensions of crosslinked polyethylene pipes (Withdrawn Document)

JS 1023:1995 Plastics - Crosslinked polyethylene pipes - Test methods

Concerns testing methods for crosslinked polyethylene pipes usedfor cold and hot water transportation under pressure for central heating applications in buildings (Withdrawn Document)

JS 765:1991 Pipes - Type 1 and type 2polypropylene (p.p) pipes

Concerns types 1 and 2 polypropylene circular pipes (Withdrawn Document)

JS 764:1991 Pipes - Thermoplastic pipes fortransport of fluids

Concerns the determination of diameters, nominal pressures andthickness of thermoplastic pipes used for transport of fluids (Withdrawn Document)

JS 766:1991 Pipes - Type 1 and type 2polypropylene (p.p) pipes - Testing methods

Specifies testing methods for types 1 and 2polypropylene pipes (Withdrawn Document)

JS 595:1989 Pipes - Low density polyethylene pipes for general purposes

Concerns low density polyethylene pipes used for general purposesas water, waste water and agricultural pipes which are used attemperatures below 45 C (Withdrawn Document)

JS 189:1988 Pipes - High density polyethylenepipes for general purposes

Concerns high density polyethylene pipes used for generalpurposes at temperature below 45 c as in water supply installations,waste (Withdrawn Document)

JS 159:1980 Pipes - Pipes for potable water of unplasticized plastic (P.V.C)

Concerns unplasticized plastic pipes (PVC) of nominaldiameters up to 1000 mm used for potable water transportation (Withdrawn Document)

JS 181:1980 Pipes - Methods of testing of pipesfor potable water of unplasticized plastic

Includes testing methods for unplasticizedpolyvinyl chloride (PVC) pipes used for potable water (Withdrawn Document)