Gas pressure vessels, gas cylinders

0 (Draft Jordanian Document (DJS))

This Technical Regulation specifies the minimum requirements for the filling conditions and filling inspection of acetylene cylinder bundles. It applies both to bundles which are filled while the cylinders are assembled in the bundle and to bundles of which the cylinders are filled as individual cylinders and are assembled into a bundle after filling. (Published Document (JS))

This Technical Regulation specifies requirements for the periodic inspection of acetylene cylinders with a maximum nominal water capacity of 150 l as required for the transport of dangerous goods and for maintenance in connection with periodic inspection. (Published Document (JS))

This Technical Regulation specifies minimum requirements for the filling conditions and filling inspection of acetylene cylinders. It includes pre-filling inspection, during filling inspection and post-filling inspection. (Published Document (JS))

This Technical Regulation specifies the basic and type testing requirements for acetylene cylinders with a maximum nominal water capacity of 150l and requirements regarding production/ batch test procedures. (Published Document (JS))

This Standard specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examinations, and tests at manufacture of refill able seamless stainless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied, and dissolved gases. ISO 9809-4:2014 is applicable to cylinders (Committee Draft (CD))

This Jordanian Technical Regulation specifies the requirements for design, specification and type testing of dedicated LPG manually operated cylinder valves specifically for use with transportable refillable LPG cylinders from 0,5 l up to 150 l water capacity. (Published Document (JS))

This Jordanian Technical Regulation specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. It is applicable to cylinders (Published Document (JS))

This Jordanian Technical Regulation specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable normalized or normalized and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. (Published Document (JS))

This Jordanian Technical Regulation specifies the minimum requirements for the material, design, construction and workmanship, manufacturing processes, examination and testing at manufacture of refillable quenched and tempered seamless steel gas cylinders of water capacities from 0,5 l up to and including 150 l for compressed, liquefied and dissolved gases. It is applicable to cylinders (Published Document (JS))

This Jordanian Standard specifies minimum requirements for materials, design, construction, prototype testing and routine manufacturing inspections of fully wrapped composite cylinders with a water capacity from 0,5 litre up to and including 150 litres for liquefied petroleum gases (LPG) exposed to ambient temperatures, with a test pressure of 30 bar. (Published Document (JS))

This standard specifies the minimum requirements for design, costruction and testing during manufature of transprtable refillable welded steel Liquefied Petroleum Gas (LPG) sylinders, of water capacity from 0.5 L up to and including 150 L, exposed to ambient temperatures. (Published Document (JS))

The purpose of this standard is to complement the requirement of various regulations, codes standards or specifications applicable to cargo and portable tanks. (Published Document (JS))

This standard represents the minimum requirements for pressure relief devices considered to be appropriate and adequate for use on cylinders having capacities of 1000 lb (454 kg) of water or less. (Published Document (JS))

This stanadard covers the maintenance inspection, repair, alteration and re-rating of pressure vessles and pressure-reliving devices. The owner/user is responsible to execute the inspection plan including the established sechedule. (Published Document (JS))

This standard has been prepard as a guide to cylinder users for establishing their own cylinder inspection procedures and standards, (Published Document (JS))

This standard specifies requirements for unfired vessels and their parts made of aluminium and aluminium alloys. (Published Document (JS))

This standard specidies requriements for the equiping of LPG tanks overground and underground with a volume not greater tan 13 m manufactured in accordance with EN 12542, EN 14075 (Published Document (JS))

This standard specifies requirements for the design and manufacture of static welded steel cylindrical tanks, serially produced for the storage of liquefied petroleum gas (LPG) with a volume not greater than 13m3 and for installation above ground. (Published Document (JS))

This standard specifies the requirements for safety systems which protect avessel, asystem of vessels, piping, accessories or asswmblies from exceeding opertating conditions. (Published Document (JS))

This standard specifies requirements for the manufacture of unfired pressure vessels and thier parts, made of steels, including their connections to non pressure parts. (Published Document (JS))

This standard specifies the materials for pressure equipment to comply with the requirements of the relevant pressure equipment material specification. and describes how this shall be applied to materials intended for the manufacturing of pressure bearing parts and attachments to them. (Published Document (JS))

this standard defines the terms, definitions, symbols and and contains instructions to unfired pressure vessels . (Published Document (JS))

This standard specifies requirements for the design, material, manufacturing and testing of pressure vessels and pressure vesseles parts intended for use with a maximum allowable pressure,PS, equal or less 50 bar and shell wall thicknesses not exceeding 60 mm, that are constructed of spheroidal graphite cast iron. (Published Document (JS))

This standard specifies the inspection and testing for unfired pressure vessels . (Published Document (JS))

This standard specifies the requirements for materials for unfired pressure vessels and manufactured from metalic materials. (Published Document (JS))

This standard specifies the requirements for design, specfication and type testing of manually operated cylinder valves specifically for use with LPG. It includes to associated equipment for vapour or liquid service. (Withdrawn Document)

Specifies identification of content gascylynders for medical and industrial use, doesnt applied for propanand butane mixure gas (Published Document (JS))

Concerns seamles steel cylinders of 150 L capacity used forunliquified compressed gases (Withdrawn Document)

Concerns methods of testing seamless cylindersused for compressed gases (Withdrawn Document)

Specifies the requirements forstoring, handling, distribution, installation, maintenance andtransportation of liquefied petroleum gases (Published Document (JS))

Specifies the minimum requiermentsregarding production, performance, and safety for valves andcylindres (Withdrawn Document)