Sign In

Quality management and quality assurance

Search Results
JS ISO 9001:2019 Quality management systems - Requirements

This Jordanian Standard specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently provide product that meets customer and applicable statutory and regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system (Published Document (JS))

JS 2243-5:2019 Energy audits Part 5: Competence of energy auditors

This part of jordainan standard can be used to soecify energy auditor qualification schemes at a national level ; used by organizations undertaking energy audits to appoint a suitably cometent energy suditor and used by organizations , in conjunction with js 2243-1, js 2243-2, js 2243-3, js 2243-4, js 2243-5 to ensure a good level of quality of the energy audits. (Published Document (JS))

JS 2243-3:2019 Energy audits Part 3: Processes

This part jordanian standard specifies the rquirements, methdology and deliverables of an energy audit within a pocess These consist of : a) organization the data from the energy audit; b) reporting and documenting the energy audit findings. this part of jordanian standard applies to sites where the energy use is due to process. it shall be used in conjuction with and is supplementary to , js 2243 (Published Document (JS))

JS 2243-4:2019 Energy audits Part 4:Transport

This part of standard does not include the infrastructure which supplies energy e.g. the elecricity generation of energy for railways this part of standard shall be used in conjuction with and is supplemtary to js 2243-1, it provides additional requirements to js 2243-1 and shall be applied simultaneously (Published Document (JS))

JS 2243-2:2019 Energy audits Part 2: Buildings

This part of jordanian standard is applicable to specific energy audit requirements in buildings. it specifies the requirements, methodology and deliverables of an energy audit in a building or group of buildings, excluding individual private dewllings. it shall be applied in conjunction with , and is supplementary to, js 2243-1, energy audits - patr1: General requirements. it provides additional (Published Document (JS))

JS 2243-1:2019 Energy audits Part 1: General requirements

This part of jordanian Standard specifies the requirements, common methodogy and deliverables for energy audits . it applies to all forms of establishments and organizations, all forms of energy and uses of energy, excluding indivdual private dwellings. This jordanian standard covers the general requirements common to all energy audits. specific energy audit requirements will complete the general (Published Document (JS))

JS 904:2016 Managing for the sustained success of an organization — A quality management approach

This Jordanian Standard provides guidance to organizations to support the achievement of sustained success by a quality management approach. It is applicable to any organization, regardless of size, type and activity. This Jordanian Standard is not intended for certification, regulatory or contractual use. (Published Document (JS))

JS 1013:2015 Guidelines for quality management system documentation

This Jordanian Standard provides guidelines for the development and maintenance of the documentation necessary to ensure an effective quality management system, tailored to the specific needs of the organization. The use of these guidelines will aid in establishing a documented system as required by the applicable quality management system standard. (Published Document (JS))

JS 1030:2014 Quality management systems - Guidelines for configuration management

This International Standard gives guidance on the use of configuration management within an organization. It is applicable to the support of products from concept to disposal. It first outlines the responsibilities and authorities before describing the configuration management process that includes configuration management planning, configuration identification, change control, (Published Document (JS))

JS EN ISO 22870:2012 Point-of-care testing (POCT) - Requirements for quality and competence

This Jordanian Standard gives specific requirements applicable to point-of-care testing and is intended to be used in conjunction with JS 15189. The requirements of this International Standard apply when POCT is carried out in hospital, clinic and by a healthcare organization providing ambulatory care. This Standard can be applied to transcutaneous measurements, the analysis of expired air, (Published Document (JS))

JS EN ISO 9001:2012 Quality management systems - Requirements

This Jordanian Standard specifies requirements for a quality management system where an organization a) needs to demonstrate its ability to consistently provide product that meets customer and applicable statutory and regulatory requirements, and b) aims to enhance customer satisfaction through the effective application of the system, including processes for continual improvement of the system (Withdrawn Document)

JS EN ISO 9000:2012 Quality management systems - Fundamentals and vocabulary

This Jordanian Standard describes fundamentals of quality management systems, which form the subject of the ISO 9000 family, and defines related terms. (Published Document (JS))

JS EN ISO 19011:2012 Guidelines for auditing management systems

This Jordanian Standard provides guidance on auditing management systems, including the principles of auditing, managing an audit programme and conducting management system audits, as well as guidance on the evaluation of competence of individuals involved in the audit process, including the person managing the audit programme, auditors and audit teams. (Published Document (JS))

JS EN ISO 15189:2012 Medical laboratories - Particular requirements for quality and competence

This Jordanian Standard specifies requirements for quality and competence particular to medical laboratories. This Standard is for use by medical laboratories in developing their quality management systems and assessing their own competence, and for use by accreditation bodies in confirming or recognising the competence of medical laboratories. (Published Document (JS))

JS 1029:2008 Quality management systems - Guidelines for quality plans

This standard provides guidelines for the development, review, application and revision of quality plans. (Published Document (JS))

JS 1769:2007 Guidelines for quality and/or environmental management systems auditing

this standard provides guidance on the principles of auditing managing audit programes, conducting quality management system audits and environmental management system audits, as well as guidance on the competence of quality and environmental system auditors,it is applicable to all organizations needing to conduct internal or external audits of quality and/ or environmental management systems (Withdrawn Document)

JS 1658:2005 Quality management - Customer satisfaction - Guidelines for complaints handling in organizations

this standard describe the guidelines for complaints handling concerning products in the organization including planning,design,maintenance and improvement.it doenot include complaints for products out the organization. (Published Document (JS))

JS 904:2001 Quality management systems - Guidelines for performance improvements

Provides guidelines beyond therequirements system given in ISO 9001 inorder to consider both theeffectivness and efficiencyof a quality management systems, andconsequently the potential for improved of the performance of anorganization (Withdrawn Document)

JS 901:2001 Quality management systems -Requirement

Specifies requirements for a quality management system wherean organization need to demonstrate it ability to consistentlyprovide product that meets customer requirements (Withdrawn Document)

JS 900:2001 Quality management systems -Fundementals and vocabulary

Describes fundementals of quality managementsystem which form the subject of the ISO 9000 family and definesrelated terms (Withdrawn Document)

JS 900-3:1998 Quality - Quality management and quality assurance standards - Part 3: Guidelines for the application of JS 901 to the development, supply, installation and maintenance ofcomputer software

Sets out guidelines to facilitate theapplication of JS 901 for organizations developing, supplying,installing and maintaining computer software. It does not add to, orotherwise change, the requirements of JS 901 (Withdrawn Document)

JS 900-2:1998 Quality- Quality management - and quality assurance standards part 2: general guidlines for the application of js 901, js 902,and js 903

this part gives guidance on the application of js901,902,903 and customers and their parties (Published Document (JS))

JS 900-3:1995 Quality management systems -

0 (Withdrawn Document)

JS 1029:1995 Quality management - Guidelines for quality plans

Provides guidelines to assist suppliers in the preparation, review,acceptance and revision of quality plans (Withdrawn Document)

JS 905:1995 Quality - Quality management and quality assurance - Vocabulary

Defines the fundamental terms relating to quality concepts, as they apply to all areas, for the preparation and use of quality-related standard and mutual understanding in international communications (Withdrawn Document)

JS 904-3:1995 Quality - Quality management and quality system elements - Part 3: Guidelines for processed materials

Gives guidance on the application of quality mamagement to processed materials (Withdrawn Document)

JS 901:1995 Quality management systems -Requirement

0 (Withdrawn Document)

JS 904-2:1995 Quality - Quality management and quality system elements - Part 2: Guidelines for services

Gives guidance for establishing and implementing a quality system within anorganization. It is based on the generic principles of internal quality management and provides a comprehensive overview of a quality system specifically for services (Withdrawn Document)

JS 900-1:1995 Quality - Quality management and quality assurance standards - Part 1: Guidelines for selection and use

Clarifies principal quality related concepts and the distinctions andinterrelationships among them and provides guidance for selction anduse of the JS 900 family of jordanian standards on quality managementand quality assurance (Withdrawn Document)

JS 904-1:1995 Quality - Quality management and quality system elements - Part 1: Guidelines

Provides guidelines on quality management and quality system elements (Withdrawn Document)

JS 902:1995 Quality - Quality systems - Model for quality assurance in production, installation and servicing

primarily at achieving customer satisfaction by preventing nonconformity at all stages from production through to servicing (Withdrawn Document)

JS 1012-1:1995 Quality - Quality assurance requirements for measuring equipment - Part 1: Metrological confirmation system for measuring equipment

Contains quality assurance requirements for a supplier to ensure that measurement are made with the intendedaccuracy, it also contains guidance on the implementation of there equirements (Withdrawn Document)

JS 904-4:1995 Quality - Quality management and quality system elements - Part 4: Guidelines for quality improvement

Gives management guidelines for implementing continuous quality improvement within an organization (Withdrawn Document)

JS 1030:1995 Quality management - Guidelines for configuration management

Gives guidance on the use of configuration management inindustry and its interface with other management systems and procedures. It first provides a management overview, then describesthe process, organization and detailed procedures (Withdrawn Document)

JS 903:1995 Quality - Quality systems - Model for quality assurance in final inspection and test

Specifies quality system requirements for use where a supplier's capability to detect and control the disposition of any product nonconformity during final inspection andtest needs to be demonstrated (Withdrawn Document)

JS 900-4:1995 Quality - Quality management and quality assurance standards - Part 4: Guide to dependability programme management

Provides guidence on dependability programme management.It covers the essential features of a comprehensive dependability programme for the planning, organization, direction and control of resources to produce products which will be reliable maintainable (Withdrawn Document)

JS 900-2:1995 Quality- Quality management - and quality assurance standards part 2: general guidlines for the application of js 901, js 902,and js 903

Gives guidance on the application of JS 901, JS 902 and JS 903 forthe following users: A) Customers and third parties B) Suppliersinvolved in applications of JS 901, JS 902, and JS 903 (Withdrawn Document)